Set Step Timer Value - Omron WS02-CXPC1-V8 - V8.1 REV 02-2009 Operation Manual

Set Step Timer Value

5-3

Set Step Timer Value

Present value of a step timer for the active step of the SFC program can be changed,
as long as the PLC is not in the RUN mode.
Changing a Step Timer Present Value
1 From the SFC editor, select and right-click the step for which the step timer present
value is to be changed.
2 Select Set Step Timer Value from the pop-up menu.
The Set Step Timer Value dialog is displayed.
3 On the Set Step Timer Value dialog, input the desired timer value (0 – 65535
seconds or 0 – 6553.5 seconds) and click OK. The new value is reflected on the
PLC.
Section 5-3
115