Connecting the PLC
4-1
Connecting the PLC
This section describes how to connect a PLC to a computer.
4-1-1
Working Online
While displaying the SFC editor, switch to the online mode.
1
Select Work Online from the PLC menu.
A confirmation message is displayed.
2
Click YES.
You will be switched to the online state, and the online SFC editor is displayed.
(The SFC editor is displayed in gray to indicate that you are working online.)
4-1-2
Working Offline
1
Select Work Online from the PLC menu.
You will be switched to offline state.
94
Section 4-1