Audio Connection To A Receiver Using The Optical Digital Audio Output; Audio Connection To A Receiver Using The Dolby Digital/Dts 5.1 Channel Analogue Outputs - CyberHome CH-DVD 635S Operation Manual

Cyberhome dvd player operation guide
Table of Contents

Advertisement

AUDIO AND VIDEO CONNECTIONS
Note:
Make sure the audio settings in the
DVD player's setup menu correspond
with those on pages 54-60. For exam-
ple: The "Audio output" has to be set
to "5.1 channel".
Audio connection to a receiver using the optical digital audio
output
Have the following cable ready:
1
1. Optical cable (not supplied)
Connect the optical digital output with the corresponding input on the AV receiv-
er by means of an optical cable (not included in your accessory). The optical
digital audio output sends an encoded "RAW" digital audio signal to your receiv-
er for decoding. Please note that this connection is only possible if your digital
receiver is compatible to dts, Dolby Digital, MPEG and/or PCM.
2
SUB
SUB
CENTER
SL
SR
FL
FR
WOOFER
WOOFER
5.1 CH ANALOG OUTPUT
5.1 CH ANALOG OUTPUT
OPTICAL DIGITAL AUDIO INPUT
Audio connection to a receiver using the Dolby Digital/dts 5.1
channel analogue outputs
The Dolby Digital/dts 5.1 channel analogue outputs can be connected to Dolby
Digital/dts capable receivers, amplifiers or active speaker systems. When you
use the 5.1 channel outputs, you are taking advantage of the DVD player's built-
in Dolby Digital/dts decoder, which decodes the Dolby Digital/dts 5.1 soundtrack
on DVD discs to six separate analogue signals.
To be able to take advantage of this feature you will need a separate set of 5.1
channel connectors that is normally included with speaker systems.
DOLBY DIGITAL/DTS AUDIO INPUT
2
SUB
SUB
CENTER
SL
SR
FL
FR
WOOFER
WOOFER
5.1 CH ANALOG OUTPUT
5.1 CH ANALOG OUTPUT
1. Connect the front right (FR), front left (FL), surround right (SR), surround left
(SL), center (CENTER) and subwoofer (SUBWOOFER) output to the corre-
sponding input of your receiver, amplifier or active speaker system.
2. For receivers, adjust the input source setting to correspond with the 5.1
channel analogue input.
23
Y
Pb / Cb
Pb / Cb
Pr / Cr
Pr / Cr
L
R
AUDIO
COAXIAL
OPTICAL
VIDEO
S-VIDEO
S-VIDEO
P - SCAN / COMPONENT
P - SCAN / COMPONENT
ANALOG OUTPUT
ANALOG OUTPUT
DIGITAL OUTPUT
VIDEO
VIDEO
OUTPUT
OUTPUT
RECEIVER WITH DOLBY
DIGITAL/DTS AUDIO INPUT
Y
Pb / Cb
Pb / Cb
Pr / Cr
Pr / Cr
L
R
AUDIO
COAXIAL
OPTICAL
OPTICAL
VIDEO
S-VIDEO
P - SCAN / COMPONENT
P - SCAN / COMPONENT
ANALOG OUTPUT
ANALOG OUTPUT
DIGITAL OUTPUT
VIDEO
VIDEO
OUTPUT
OUTPUT
ON
..
I
TUV
TUV
Rheinland
Rheinland
Product Safety
Product Safety
O
~100-230V
~100-230V
AC IN
AC IN
OFF
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT
RGB OUTPUT
RGB OUTPUT
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
AC SWITCH
AC SWITCH
AV CONNECTOR SCART
AV CONNECTOR SCART
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RECEIVER
ON
I
..
TUV
TUV
Rheinland
Rheinland
Product Safety
Product Safety
O
~100-230V
~100-230V
AC IN
AC IN
OFF
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT
RGB OUTPUT
RGB OUTPUT
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.
AC SWITCH
AC SWITCH
AV CONNECTOR SCART
AV CONNECTOR SCART
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Advertisement

Table of Contents
loading

Table of Contents