Audio Output Connections; Audio Connection To A Tv/Receiver Using The Analogue Stereo Outputs; Audio Connection To A Receiver Using The Coaxial Digital Output - CyberHome CH-DVD 452 Operation Manual

Cyberhome entertainment dvd-player operation guide ch-dvd 452

Table of Contents

AUDIO AND VIDEO CONNECTIONS

Audio output connections

This unit features different audio line outputs for connection to a receiver or TV.

There are two possible connection types:

Analog stereo outputs

Coaxial digital output

Audio connection to a TV / receiver using the analogue stereo

outputs

Have the following cable ready:

1. Audio/Video cable (optionally supplied; red and white plug)

Connect the stereo audio outputs of your DVD Player with the corresponding

inputs on your receiver. Please use the red and white connectors on the

Audio/Video cable.

WHITE

Audio connection to a receiver using the coaxial digital

output

At the back of the DVD player, there is a digital audio output socket "COAXI-

AL" for a coaxial cable.

This can be used to connect the following:

• an A/V receiver or an A/V amplifier with a digital multi-channel sound

decoder (MPEG 2, Dolby Digital)

• a receiver with two channel digital stereo (PCM)

What is digital multi-channel sound?

Digital multi-channel sound offers you a maximum of sound quality. You need a

multi-channel A/V receiver or amplifier that supports at least one of the audio

formats of the DVD player (MPEG 2 and Dolby Digital). For the formats that

your receiver supports, refer to the manual of the receiver.

STEREO AUDIO INPUT

RED

Table of Contents