Modbus Tcp; Intelligent Card (Optional) - PowerWalker VFI LICR IoT Series User Manual

1
2
For more detail information and Q&A about the IoT and APP, please refer to the HELP menu
in the app.
෮ Wireless connection
The wireless module is optional, please contact your local distributor for details.

5.4 Modbus TCP

Built-in ethernet port offers Modbus TCP feature to facilitate remote monitoring of the UPS
into your own software. Contact with your service for protocol details.

5.5 Intelligent Card (Optional)

Intelligent Card allow the UPS to communicate with different types of devices in variety
of networking environments. The PowerWalker VFI LICR IoT series could use the following
connectivity cards, please contact your local distributor for details.
• NMC Card - Ideal monitoring solution enables user to monitor and control the status of
UPS on web browser via internet.
• CMC card -provides connection to Modbus protocol with standard RS485 signal.
• AS400 G2 card - Provides voltage-free dry-contact signals for programmable controller
and management system.
• EMP - Supports temperature and humidity sensors for remote environment monitoring,
should work with NMC Card.
3
4
19
6
5