Optional Accessories - Simpleway nnounce ionode4 Hardware User's Manual

ionode4 – Hardware User Guide
FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
RoHS Statement
Directive 2002/95/EC – Restriction of Hazardous Substances (RoHS)
Maintenance and Repair
To prevent device damage or hazards, only nnounce authorized personnel should service or repair the device.
Unpacking
•
ionode4 device
•
4 clear anti-scratch rubber feet
•
2 rack mount brackets
•
3x terminal block connectors with 12 positions
•
1x terminal block connectors with 9 positions

Optional accessories

•
Optional: Connection plate with 4 screws for rack mounting in pair
TM
nnounce by Simpleway
NN_USER_GUIDE_ionode4_v2.2.docx
4