Simpleway nnounce ionode4 Hardware User's Manual page 3

ionode4 – Hardware User Guide
•
Read these instructions.
•
Keep these instructions.
•
Follow all instructions.
•
Heed all warnings and cautions.
•
Do not use this apparatus near water.
•
Clean only with a dry cloth.
•
Do not block any ventilation opening. Install in accordance with the manufacturer's instructions.
•
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce
heat.
•
To reduce the risk of electrical shock, the power cord shall be connected to a mains socket outlet with a protective
earthing connection.
•
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety.
•
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
•
Only use attachments/accessories specified by the manufacturer.
•
Unplug this apparatus during lightning storms or when unused for long periods of time.
•
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
•
The appliance coupler, or the AC mains plug, is the AC mains disconnect device and shall remain readily operable
after installation.
•
Adhere to all applicable, local codes.
•
Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment
installation.
•
Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus. Clean only with a
dry cloth.
•
Do not unplug the unit by pulling the cord, use the plug.
•
Do not submerge the apparatus in water or liquids.
•
Keep the ventilation opening free of dust and other contaminants.
THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR DAMAGES CAUSED TO PERSONS, THINGS OR DATA DUE TO AN
IMPROPER OR MISSING GROUND CONNECTION. CONTACT THE AUTHORIZED SERVICE CENTER FOR ORDINARY AND
EXTRAORDINARY MAINTENANCE.
IT IS ABSOLUTELY NECESSARY TO VERIFY THESE FUNDAMENTAL REQUIREMENTS OF SAFETY AND, IN CASE OF DOUBT, REQUIRE
AN ACCURATE CHECK BY QUALIFIED PERSONNEL.
The device has been tested for compliance:
• ICES-003:2020-10
• EN 55032:2015 / DIN EN 55032:2015/A11:2021 Electromagnetic compatibility
of multimedia equipment – Emission Requirements / (CISPR
32:2015/AMD1:2019)
•
ENT 55035:2017 / DIN EN 55035:2017/A11:2022 Electromagnetic
compatibility of multimedia equipment – Immunity requirements / (CISPR
35:2016)
TM
nnounce by Simpleway
NN_USER_GUIDE_ionode4_v2.2.docx
3