Advertisement
ionode4 – Hardware User Guide
NN_USER_GUIDE_ionode4_v2.2.docx
The nnounce configuration UI takes over the information from Q-SYS. In the Basic mode the default design is used in the
DSP designer. Manual changes by the user are overwritten with the default design after reconnecting to the WebSocket.
The Network Streams section shows the streams as configured in the Q-SYS designer.
IMPORTANT: Do not make any changes in the nnounce configuration UI - DSP designer and Network stream - to avoid
malfunction.
Default
DSP design:
15
TM
nnounce
by Simpleway
Advertisement
Need help?
Do you have a question about the nnounce ionode4 and is the answer not in the manual?