Advertisement
ionode4 – Hardware User Guide
OPERATION
Recovery from USB
ionode4 device recovery from USB is provided by nnounce support team.
1. Insert the USB drive into the USB-C port on the rear panel.
2. Power off and then power on the device by disconnecting and reconnecting the power connector on the rear
panel.
3. Control LEDs on rear panel show flashing progress once the device is again on power supply. The control LEDs are
continuously starting to turn on in blue color.
4. The upgrade is complete when all control LEDs on the rear panel turn green.
5. REMOVE the USB drive.
6. Complete the process by turning the power off and on again (as in step 2).
Firmware Update
Firmware update of your ionode4 device is available in the Maintenance section.
The installation file is provided by the nnounce support team.
A. Navigate in the left-
hand menu to the
Maintenance section.
Click on the Update new
button in the Firmware
update part.
TM
nnounce
by Simpleway
NN_USER_GUIDE_ionode4_v2.2.docx
24
Advertisement
Need help?
Do you have a question about the nnounce ionode4 and is the answer not in the manual?