Install The Valve Controller 2 - Yolink YS5003-UC Installation & User Manual

Install the Valve Controller 2

I
Preparing for installation:
Determine where you will mount the valve
controller. The Valve Controller 2 was designed
to be wall-mounted, at an indoor or outdoor
location.
If installing your Valve Controller 2 and/or valve
device at an outdoor location, please first refer to
the environmental range specifications, found on
the Valve Controller 2 product support page of
our website. Also, while the Valve Controller 2,
the EVO Valve Operator and our motorized
valves are rated for outdoor use, to ensure years
of dependable operation, provide protection from
rain and direct sunlight with overhead cover, in
the form of an enclosure or rain hood.
Do not install your valve controller or valve
device at a location where it will be submerged
in water.
Use of the 12VDC power supply/adapter is
optional. If you do not use the power
supply/adapter (or provide your own 12VDC
power supply), the valve controller must have
batteries installed. If you do connect a 12VDC
power supply to your valve controller, the use of
batteries is optional.
10