Yolink YS5003-UC Installation & User Manual page 13

Install the Valve Controller 2,
I
Continued
With the use of optional extension cables, the
valve controller can be installed remotely from
the Valve Operator or motorized valve. In some
cases this may allow placing the controller at a
more convenient or more accessible location (for
battery replacement, etc.). The location of the
valve controller must be within the limits of the
cables. If in doubt, connect all applicable cables
between the controller and the valve device and
the AC power outlet (if applicable) and choose
an appropriate location for the controller.
(Extension cables can be purchased on our
website.)
Determine how you will mount the valve
controller to the wall, and ensure you have the
appropriate mounting hardware (screws,
anchors, etc.) for the wall surface.
Install the Valve Controller 2:
1. Holding the valve controller at the desired
location, and using a marker or pencil, transfer
the valve controller's top mounting hole location
to the wall surface.
2. If using wall anchors, install one at the top
mounting hole location, per the manufacturer's
instructions (drill a pilot hole first, etc.)
11