Yolink YS5003-UC Installation & User Manual page 14

Install the Valve Controller 2,
I
Continued
3. Insert a screw in the top mounting hole
location, but do not screw it flush with the wall;
leave space on the end of the screw for the valve
controller.
4. Hang the valve controller on this screw, and it
should be level on the wall. Optionally, you can
verify the valve controller is level with a level tool
at this time. Using a marker or pencil, transfer
the valve controller's two bottom mounting
holes to the wall surface.
5. If using wall anchors, install them at this time.
6. Insert screws in each of the two bottom
mounting hole locations.
7. Tighten all three screws, and confirm the valve
controller is secured to the wall surface.
12