Install The Valve Controller 1 - Yolink YS4909-UC Installation & User Manual

Install the Valve Controller 1

I
Preparing for installation:
Determine where you will mount the valve
controller. The Valve Controller 1 was designed
to be wall-mounted, at an indoor or outdoor
location.
If installing your Valve Controller 1 and/or valve
device at an outdoor location, please first refer to
the environmental range specifications, found on
the Valve Controller 1 product support page of
our website. Also, while the Valve Controller 1,
the Bulldog Valve Controller and our motorized
valves are rated for outdoor use, to ensure years
of dependable operation, provide protection from
rain and direct sunlight with overhead cover, in
the form of an enclosure or rain hood.
Do not install your valve controller or valve
device at a location where it will be submerged
in water.
With the use of optional extension cables, the
valve controller can be installed remotely from
the Bulldog or motorized valve. In some cases
this may allow placing the controller at a more
convenient or more accessible location (for
battery replacement, etc.). The location of the
valve controller must be within the limits of the
cables. If in doubt, connect all applicable cables
between the controller and the valve device and
choose an appropriate location for the controller.
(Extension cables can be purchased on our
website.)
13