1. Manuals
  2. Brands
  3. Yolink Manuals
  4. Controller
  5. YS4909-UC
  6. Manual

Yolink YS4909-UC Manual

Gas/water valve controller
Hide thumbs Also See for YS4909-UC:
Table of Contents

Advertisement

Quick Links

Download this manual
Kit A: Recommended with:
Kit B: Recommended with:
Gas/Water Valve Manipulator
Motorized Valve (2-wire)
Gas/Water Valve Controller
YS4909-UC
Installa on & User Guide
(for Kit A/Kit B)
Rev 1.1

Advertisement

Table of Contents
loading

Related Manuals for Yolink YS4909-UC

Summary of Contents for Yolink YS4909-UC

  • Page 1 Kit A: Recommended with: Kit B: Recommended with: Gas/Water Valve Manipulator Motorized Valve (2-wire) Gas/Water Valve Controller YS4909-UC Installa on & User Guide (for Kit A/Kit B) Rev 1.1...
  • Page 2 Thank you for purchasing YoLink products and for entrus ng us with your smart home needs! Your 100% sa sfac on is our goal. If you experience any problems with se ng up your new YoLink Gas/Water Valve Controller, please give us a chance to assist you, before returning your purchase.

  • Page 3: Table Of Contents

    Introduc on ······························································································ 3 · Set Up ····································································································· · 5 · · Installa on ······························································································ · 7 · · Using the YoLink App ·················································································27 YoLink Control ···························································································35 Maintenance ······················································································· ····39 · Specifica ons ····················································································· ·····42 · Troubleshoo ng ················································································· ·····48 ·...

  • Page 4: In The Box

    A. In the Box A-1. Kit A - YS4909-UC Gas/Water Valve Controller + Valve Manipulator Box 1 A. Gas/Water Valve Controller B. Moun ng Hook C. Quick Start Guide Box 2 (Op onal Accessory) A. Gas/Water Valve Manipulator B. Bracket (2) (with 2 moun ng bolts)
  • Page 5 A-2. Kit B - YS4909-UC Gas/Water Valve Controller + Motorized Valve Box 1 A. Gas/Water Valve Controller B. Moun ng Hook C. Quick Start Guide Box 2 (Op onal Accessory) A. Motorized Valve (DN15/DN20 /DN25/DN32, 2-wire)

  • Page 6: Introduc On

    B. Introduc on The YoLink Gas/Water Valve Controller is a smart device that can control a 12 VDC ball-type (only) gas or water valve manipulator remotely with the YoLink app on your smartphone or tablet or using the SET bu on on the device. Pressing "Open" or "Close" on the app will mechanically rotate the handle 90 degrees in the appropriate direc on, to close or open the valve.
  • Page 7 Connec ng to Cloud Slow Blinking Green Upda ng Fast Blinking Green Establishing Connec on with YoLink System (YoLink Control) Blinking Red Once Turn off the manipulator/valve or device is connected to the cloud and is func oning normally Fast Blinking Red...
  • Page 8 C. Set Up C-1. Set Up - First-Time YoLink Users (Exis ng users proceed to C-2. Add Device, next page) Download the YoLink app through Apple App Store or Apple iPhone or tablet that is iOS 9.0 Google Play Store (Search in...
  • Page 9 C-2. Add Device Ta p “ ” b u o n , t h e n s c a n Q R C o d e o n t h e d e v i c e . F o l l o w t h e s t e p s t o a d d t h e d e v i c e Press the SET bu on once to turn on the device a er installa on.

  • Page 10: Installa On

    D. Installa on D-1. Diagram Diagram(A): Install with Ball-type Manipulator Gas/Water Valve Manipulator Gas/Water Valve (Ball-type) Controller Output Sha of Manipulator Clutch Hold the ring and keep pulling down on the clutch, you can rotate the handle manually to open or close the valve Connec on Cable * The handle must rotate...
  • Page 11 Diagram(B): Install with Ball-type Motorized Valve (2-Wire) Gas/Water Valve Controller Posi on Indicator Show the valve posi on - Horizontal with the pipe = Open - Ver cal with the pipe = Closed Motorized Valve Connec on Cable Water Pipe...
  • Page 12 D-2. Instruc ons for installing the Gas/Water Valve Controller for use with a new Valve Manipulator / Motorized Valve D-2-1. How to install the Gas/Water Valve Manipulator 1. These Tools may be Required Phillips Screwdriver Allen Wrench - Number 5 Metric 1.
  • Page 13 2. Get Ready Turn the ball valve to OPEN status (keep the center axis of ball valve aligned to the water pipe) Loosen the two screws on the two L o o s e n t h e b ra c ket s i nto t wo handle-suppor ng bolts separate parts (carefully place the two bolts aside)
  • Page 14 3. Begin Installa on Insert the screw through the top of the brackets and the moun ng ear of the 1. The manipulator should be installed manipulator with the non-threaded hole close to the ball valve (place the two handle-suppor ng bolts on 2.
  • Page 15 Securely ghten the two screws on Securely ghten the two screws on the two handle-suppor ng bolts the brackets using a Number 5 using a Phillips screwdriver metric Allen wrench Handle Rubber Sleeve The handle’s rubber sleeve may affect the ghtness of the rocker arm and the handle.
  • Page 16 D - 2 - 2 . H ow to i n sta l l t h e M o to ri zed Va l ve 1. These Tools or Parts may be Required NPT Water Pipe Pipe Wrench Locking Pliers Manual Steel Aqueous Marker Waterproof Pipe Cu er...
  • Page 17 Place the motorized valve at the desired loca on, then mark an outline (with a aqueous marker, t a p e , e t c . ) o f t h e m o t o r i z e d v a l v e o n t h e w a t e r p i p e f o r future reference We do not recommend removing...
  • Page 18 3. Begin Installa on U.S. Solid Valves follow Na onal I n s t a l l a n d s e c u r e g h t l y t h e Standards for pipe thread. In the w a t e r p i p e a c c e s s w i t h t w o U .
  • Page 19 D - 2 - 3 . H ow to C o n n ect t h e M a n i p u l ato r/ M o to ri zed Va l ve to t h e C o nt ro l l er A er the manipulator/motorized valve is securely installed (all screws ght, etc.), refer to “Install or Replace the Ba eries (Gas/Water Valve Controller)”...
  • Page 20 D-3. Instruc ons for installing the Gas/Water Valve Controller for use with an exis ng Valve Manipulator (Non-smart, 12VDC only!) / Motorized Valve (Non-smart, 2-wire, 12VDC only!) 1. These Tools may be Required U lity Knife Scissors Wire Nuts Electrical Tape Wire Cu er/Stripper /Connectors (2) 1.
  • Page 21 D - 3 - 1 . H o w t o P r e p a r e f o r Use a wire cu er/stripper U s i n g a w i re s t r i p p e r, I n s t a l l a o n o f t h e V a l v e to remove the connector remove the insula on on...
  • Page 22 D-3-2. How to Prepare for Installa on Using a wire stripper or u lity of the Manipulator knife, carefully remove the outer jacket/insula on on the cable. Use U s e a w i r e c u e r / s t r i p p e r t o care to avoid cu ng or nicking the r e m o v e t h e c o n n e c t o r o n t h e internal conductors...
  • Page 23 D-3-3. How to Prepare for Installa on Using a wire stripper or u lity of the Motorized Valve knife, carefully remove the outer jacket/insula on on the cable. Use U s e a w i r e c u e r / s t r i p p e r t o care to avoid cu ng or nicking the r e m o v e t h e c o n n e c t o r o n t h e internal conductors...
  • Page 24 D - 3 - 4 . H ow to C o n n ect t h e M a n i p u l ato r/ M o to ri zed Va l ve to t h e C o nt ro l l er Using a wire nut, twist the black wire with text marked “24AWG”...
  • Page 25 Diagram (A): Connect the manipulator to the controller Diagram (B): Connect the motorized valve to the controller...
  • Page 26 D-4-1. Test the Controller and Manipulator (see Illustra on Next Page) Test the controller several mes by pressing the SET bu on and watching for the smooth closing /opening of the valve. Then, use the YoLink app to open and close the valve If Not Working Properly:...
  • Page 27 Water SET Bu on Pipe The valve is opened The valve is closed...
  • Page 28 flow at the tap stops completely (while the valve should be closed) and flows with no loss of pressure (while the valve should be open). Then, use the YoLink app to open and close the valve If Not Working Properly:...
  • Page 29 D-5. Installa on Methods (Anywhere or Wall-moun ng) Method A: Place anywhere Please refer to device environmental opera ng range informa on on page 42-47. Use this device outside the recommended ranges at your own risk Method B: Wall-moun ng the controller Before installing the hook, place it in the appropriate posi on for hanging the controller.

  • Page 30: Using The Yolink App

    E. Using the YoLink App E-1. Device page Details - Tap to go to Details page(refer to page 28) Connec on Status of Gas/Water Valve Controller and Hub Current Ba ery level - Shown red if replacement is required Real- me Status of Gas/Water Valve Controller:...
  • Page 31 Current Ba ery Level - Shown red if replacement is required n. Firmware Version “#### ready now ” indicates a new update is available (refer to page o. Remove Device From Current Account * Tap to delete the device from your YoLink account...
  • Page 32 2. U lize YoLink Control to "pair" one or more water leak sensors to the valve controller, so that the water is shut off as soon as a water leak is detected. YoLink Control is a unique device-to-device protocol that allows for this to work, without internet and even without power.
  • Page 33 b. Add an automa on b-1 Edit name b-2 Edit trigger b-3 Edit behavior (You must have at least one ac on device, or you cannot set a behavior) b-4 Edit when (Set a me range for the automa on (always or during specific days or mes) b-5 Tap to save the se ngs Swipe Le...
  • Page 34 E-4. Timer The mer will run only once. You can set a new mer a er the mer has already run or a er you cancel it b. Edit the mer b-1 Enable “Turn On A er” and (or) “Turn Off A er” b-2 Set the mer dura on in “Hours and Minutes”...
  • Page 35 E-5. Schedule 1. You can have a maximum 6 schedules at one me 2. You may add as many schedules as you want in Automa on se ngs. Automa on se ngs are saved in the cloud Swipe Le d. Click to edit the schedule 1.
  • Page 36 E-6. Scene Go to the “Smart” screen, and default is “Scene” screen There are four pre-set scenes, you can choose to either edit or delete each of them Swipe Le b. Add a scene c. Click to edit the scene b-1 Edit name 1.
  • Page 37 E-7. Voice Assistants Connect YoLink with third-party voice assistants to control (turn on or turn off ) or monitor the status of your devices through voice commands Tap “ ” in the upper le corner to go to My Profile Go to Se ngs >...

  • Page 38: Yolink Control

    Hub or an internet connec on. (Use of YoLink Control is op onal; you can use the Automa on feature in the app OR use YoLink Control, but YoLink Control offers the benefit of opera on without the Hub or internet connec on.) One device controls another, directly.
  • Page 39 To configure a Gas/Water Valve n t r o l l e r a s t h e r e s p o n d e r close the valve using SET bu on o r v i a Yo L i n k a p p ( v e r i f y t h e valve is shown to be Closed on the app).
  • Page 40 Water Leak Sensor to normal (no (Water depth >0.01 inch) water detected) does not open the valve More advanced sequences, controlling mul ple outputs (e.g. close valve and ac vate siren) are available via the YoLink app Water Pipe Opened Closed...
  • Page 41 F-2. Unpairing A t t h e W a t e r L e a k S e n s o r (controller), press and hold the SET bu on for 10-15 seconds un l the LED quickly blinks green, then red, then, release the bu on At the Gas/Water Valve Controller (responder), press and hold the...

  • Page 42: Maintenance

    G. Maintenance G-1. Firmware Update To ensure our customers have the best user experience, we highly recommend you update to the newest version firmware when an update is available In “Firmware”, if a new version is listed as available (#### ready now), click it to start the firmware update process You may use your device during the update as it is performed in the background.
  • Page 43 Factory reset will erase all of your se ngs and restore it to factory defaults. A er the factory reset, your device will remain in your Yolink account Hold the SET bu on for 20-25 seconds un l the status light blinks red and green alternately,...
  • Page 44 G-3. Install or Replace the Ba eries of Gas/Water Valve Controller With a li ing/prying ac on on the two clamp latches, open the cover on the controller (due to the rainproof design, this step may be slightly difficult) Install four alkaline non-rechargeable AA ba eries...
  • Page 45 H. Specifica ons H-1. Gas/Water Valve Controller Ba ery: 6V DC ( four alkaline non-rechargeable AA ba eries Output Voltage: 12V DC Device Current Draw: ≤ 160mA (on, without connec ng with the manipulator/motorize valve), ≤ 90uA (standby) IP Ra ng: IP63 (Rainproof) Manipulator Type: Ball valve type, non-smart control...
  • Page 46 Dimensions: Unit: inches (millimeters) 0.98 (24.8) 3.24 (82.2) 0.31 (7.8) 0.94 (24.0) 2.68 (68.2) 0.24 0.26 (6.7) 0.37 (9.5) (6.2) 0.94 (24.0) 3.24 (82.2) FRONT SIDE...
  • Page 47 H-2. Gas/Water Valve Manipulator Working Voltage: 8 - 14V DC Valve Type: Ball Valve 80 - 106 KPa Valve Pressure: Torque: 40kgf.cm Electrical Valve 5 - 10 seconds (max 15 seconds) Opening/Closing Time: Applicable Water Pipe Size: 1/2 inch (DN15), 3/4 inch (DN20), 1 inch (DN25) Environment: Working Temperature: 14°F - 131°F (-10°C - 55°C) (The pipe (Indoor Use Only!)
  • Page 48 Dimensions: Unit: inches (millimeters) 2.83 (72.0) 2.76 (70.0) 2.36 (60.0) (63.5) 2.76 (70.0) 2.09 (53.0) 0.49 (12.5) 1.18 (30.0) 0.59 (15.1) 1.42 (36.0) 0.87 (22.0) 1.34 (34.0) 0.75 (19.0) 0.67 (17.0) Max Gap: ~0.43 (~11.0) 1.18 (30.0)
  • Page 49 H-3. Motorized Valve Working Voltage: 12V DC Working Current: Max 500mA (while valve is opening or closing) Valve Type: Ball valve Suitable Media: Water, air 145PSI (1.0Mpa) Max Working Pressure: Max. Torque Force For Actuator: 2N.m IP Ra ng: IP67 (waterproof) Open/Closed Time: 5 - 10 seconds (max 15 seconds) Thread:...
  • Page 50 Valve Body Material: Brass Actuator Material: Engineering Plas cs Applicable Water Pipe Size: 1/2 inch (DN15), 3/4 inch (DN20), 1 inch (DN25), 1-1/4 inch (DN32) Valve Dimension: Dn15: 1/2ʺ NPT female thread connec on, 0.59inch (15mm) full bore DN20: 3/4ʺ NPT female thread connec on, 0.79inch (20mm) full bore DN25: 1ʺ...

  • Page 51: Troubleshoo

    Press the SET bu on once to open/close the valve, also you can open/close the valve via YoLink app or set a new mer. (When you add a rese ng/one- me-use mer this will need to be amended with that new informa on.) 3.

  • Page 52: Warning

    Warning Please install, operate and maintain the Gas/Water Valve Controller and Manipulator (or Motorized Valve) only as outlined in this manual. Improper use may damage the unit and/or void the warranty Do not install or use the controller and manipulator outside of the temperature and humidity range listed in the Environmental sec on in Specifica ons, on page 2-47.
  • Page 53 Power the controller only with four AA ba eries (see below, regarding ba eries) Use only new, name brand, alkaline non-rechargeable AA ba eries Do not use rechargeable ba eries Do not use zinc blend ba eries Do not mix new and old ba eries Do not puncture or damage ba eries.

  • Page 54: Customer Service & Warranty

    If you have any difficul es installing or using your Gas/Water Valve Controller, please contact our Customer Service department during business hours: US Live Tech Support: 1-949-825-5958 M-F 9am - 5pm PST Email: service@yosmart.com YoSmart Inc. 17165 Von Karman Avenue, Suite 105, Irvine, CA 92614 Warranty 1 Year Limited Electrical Warranty YoSmart warrants to the original residen al user of this product that it will be free from defects in...
  • Page 55 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec on against harmful interference in a residen al installa on. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc ons, may cause harmful interference to radio communica ons.
  • Page 56 Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifica ons to this equipment. Such modifica ons could void the user’s authority to operate the equipment. FCC RF Radia on Exposure Statement “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configura ons.

Table of Contents