Firmware Update - Yolink YS5003-UC Installation & User Manual

Firmware Update

S
Your YoLink products are constantly being
improved, with new features added. It is
periodically necessary to make changes to your
device's firmware. For optimal performance of
your system, and to give you access to all
available features for your devices, these
firmware updates should be installed when they
become available.
In the Detail screen of each device, at the
bottom, you will see the Firmware section, as
shown in the image below. A firmware update is
available for your device if it says "#### ready
now"
Signal Intensity
Firmware
Tap in this area to start the update.
The device will update automatically, indicating
progress by percentage-complete. You may use
your device during the update, as the update is
performed "in the background". The LED will
slowly blink green during the update, and the
update may continue for several minutes beyond
the LED turning off.
Strong (-32 dBm)
Delete
0703
25