Compat Menu; Selecting The Compatibility Mode; Hdm Mode (High Density Transmission); Ir&Key Menu - Lectrosonics DSSM-A1B1 Instruction Manual

DSSM-A1B1, DSSM-B1C1, DSSM/E01-A1B1, DSSM/E01-B1C1, DSSM/E07-941

Compat Menu

Selecting the Compatibility Mode

TopMenu
Input
..........
......... ..........
.........
......... ..........
... ..........
... .......... .........
... .........
... ......... ..........
..........
... .......... .........
... .........
... .......... .........
..........
... .......... .........
... .......... .........
... .........
......... ..........
... ..........
... .......... .........
... ......... Xmit...
... ......... ..........
..........
... .......... .........
... .........
... ......... ..........
.......... .........
... ..........
... .......... .........
... .........
... .......... .........
..........
... ......... ..........
... .........
... .......... .........
..........
... ......... ..........
... .........
... ......... ..........
......... ..........
...
...
...
Compat

Compat
Use the and arrow buttons to select the desired
mode, then press the BACK button twice to return to the
Main Window. Compatibility modes are as follows:
• Standard Mono Digital
• High Density Mode

HDM Mode (High Density Transmission)

This special transmitting mode and associated low RF
power of 2mW allows the user to "stack" many units
into a very small area of the spectrum. Standard, ETSI-
compliant RF carriers take up about 200 kHz of occupied
bandwidth, while HDM takes up about half of that, or 100
kHz, and allows for much tighter channel spacing,without
concern for frequency coordination.
IR&Key Menu

SendFreq

Press MENU/SEL to send the Frequency to another
transmitter or receiver via the IR port.
IR&Key
IR&Key
SendFreq
......... ..........
..........
.......... .........
... .........
... ......... ..........
..........
... ......... ..........
... .........
... .......... .........
.......... .........
... ..........
... .......... .........
... .........
... .......... .........
..........
... ......... ..........
... .........
... .......... .........
..........

SendAll

... ......... ..........
... .......... .........
... .........
......... ..........
... ..........
... .......... .........
... .........
... ......... ..........
..........
... .......... .........
... .........
... .......... .........
..........
... ......... ..........
... ......... ..........
... .........
.......... .........
... ..........
... ......... ..........
... .........
...
...

GetFreq


SendAll
Press MENU/SEL to send information to a paired receiv-
er: Frequency, Transmitter Name, and Talkback Enabled
to another transmitter or receiver via the IR port.
IR&Key
SendFreq
......... ..........
..........
......... ..........
... .........
.......... .........
... ..........
... .......... .........
... .........
... ......... ..........
..........
... .......... .........
... .........
... ......... ..........
......... ..........
... ..........
... ......... ..........
... .........
... ......... ..........
.......... SendAll
... ......... .......... SendAll
... .........
... ......... ..........
..........
... .......... .........
... .......... .........
... .........
.......... .........
... ..........
... .......... .........
... .........
... ......... ..........
..........
... .......... .........
... .........
... ......... ..........
.......... .........
... ..........
... ......... ..........
... .........
...
...
GetFreq

NOTE: SendAll does not send Encryption Key.
This must be done separately.
14
C o m p a t
o D 2
o H D M
D2
HDM
SendFreq
Sync -->
SendAll
Sync -->
GetFreq
Press MENU/SEL to get Frequency information from
another transmitter or receiver via the IR port.
IR&Key...
GetFreq
GetFreq
.......... .........
.......... .........
..........
... .......... .........
... .........
.......... .........
... ..........
... .......... .........
... .........
... .......... .........
..........
... .......... .........
... .........
... .......... .........
.......... .........
... ..........
... .......... .........
... .........
... .......... .........

GetAll

..........
... .......... .........
... .........
... .......... .........
..........
... .......... .........
... .......... .........
... .........
.......... .........
... ..........
... .......... .........
... .........
... .......... .........
..........
... .......... .........
... .........
... .......... .........
..........
... .......... .........
... .........
...
...

KeyType


GetAll
Press MENU/SEL to get information from a paired re-
ceiver: Frequency, Transmitter Name, Talkback Enabled,
and Compatibility Mode via the IR port.
IR&Key...
GetFreq
..........
.........
.......... .........
..........
... .......... .........
... .........
... .......... .........
..........
... .......... .........
... .........
... .......... .........
..........
... .......... .........
... .......... .........
... .........
.......... .........
... ..........
... .......... .........
... .........
... .......... ......... GetAll GetAll
..........
... .......... .........
... .........
... .......... .........
.......... .........
... ..........
... .......... .........
... .........
... .......... .........
..........
... .......... .........
... .........
... .......... .........
..........
... .......... .........
... .........
... .......... .........
.......... .........
... ..........
... .........
...
...
KeyType

KeyType
The DSSM receives an encryption key via the IR port
from a key generating receiver. Begin by selecting a key
type in the receiver and generating a new key (key type
is labeled KEY POLICY in the DSQD receiver). Set the
matching KEY TYPE in the DSSM and transfer the key
from the receiver (SYNC KEY) to the DSSM via the IR
ports. A confirmation message will display on the receiv-
er display if the transfer is successful. The transmitted
audio will then be encrypted and can only be listened to
if the receiver has the matching encryption key.
IR&Key...
GetFreq
.......... .........
..........
.......... .........
... .......... .........
... .........
.......... .........
... ..........
... .......... .........
... .........
... .......... .........
..........
... .......... .........
... .........
... .......... .........
..........
... .......... .........
... .......... .........
... .........
.......... ......... GetAll
... ..........
... .......... .........
... .........
... .......... .........
..........
... .......... .........
... .........
... .......... .........
.......... .........
... ..........
... .......... .........
... .........
.......... .........
... ..........
... .......... .........
... .........
... .......... .........
..........
... .......... .........
... .........
...
...
GetFreq
 KeyType
The DSSM has four options for encryption keys:
• Universal: This is the most convenient and basic
option available, and the default setting on all
Lectrosonics D2 digital units. All encryption-capa-
ble Lectrosonics transmitters and receivers contain
the Universal key. A unique key does not have to
be generated. Simply set the Lectrosonics encryp-
tion-capable transmitters and receivers to Univer-
sal key type, and the encryption is in place. This
allows for convenient encryption amongst multiple
transmitters and receivers, but is not as secure as
creating a unique key.
GetFreq
Sync -->
GetAll
Sync -->
KeyType
Univrsal
LECTROSONICS, INC.