Omron H3DS Manual page 24

Specifications
■ General
Item
Operating mode
Operating/Reset method
External connections
Terminal block
Terminal screw tightening torque 0.98 N·m max.
Output type
Mounting method
Attachment
Approved standards
Note: Can be mounted to 35-mm DIN Track with a plate thickness of 1 to 2.5 mm.
■ Time Ranges
Time scale
x 1 1 to 12 s
x 10 10 to 120 s
Star-delta transfer time
■ Ratings
Rated supply voltage (see note)
Operating voltage range
Power reset
Reset voltage
Power consumption
Control output
Ambient temperature
Ambient humidity
Note: DC ripple rate: 20% max.
B-32
Solid-state Star-delta Timer
Star-delta operation
Time-limit operation/Self-reset
Screw terminal, Screw-Less Clamp
Screw terminal type:
Screw-Less Clamp type: Clamps two 1.5-mm
(Star operation circuit) Relay:
(Delta operation circuit) Relay: SPST-NO
DIN track mounting (see note)
Nameplate label
UL508, CSA C22.2 No.14
Conforms to EN61812-1, IEC60664-1 4 kV/2, VDE0106/P100
Output category according to IEC60947-5-1 (AC-13; 250 V 5A/AC-15; 250 V 1 A/DC-13; 30 V 0.1 A)
Star operation time ranges
Programmable at 0.05 s, 0.1 s, 0.5 s, or 1 s
24 to 230 VAC (50/60 Hz)/24 to 48 VDC
85% to 110% of rated supply voltage
Minimum power-off time: 0.5 s
2.4 VAC/DC max.
AC: 21 VA max./1.7 W max. (typical: 20 VA/1.6 W) at 230 VAC
11 VA max./2.0 W max. (typical: 8.6 VA/1.5 W) at 100 to 120 VAC
DC: 1.3 W max. (typical: 1.2 W) at 24 VDC
0.7 W max. (typical: 0.6 W) at 48 VDC
Contact output: 5 A at 250 VAC with resistive load (cos = 1)
Operating: –10 C to 55 C (with no icing)
Storage:
Operating: 35% to 85%
H3DS-G
H3DS-G
2
Clamps two 2.5-mm max. bar terminals without sleeves.
2
max. bar terminals without sleeves.
SPST-NO
5 A at 30 VDC with resistive load (cos = 1)
–25 C to 65 C (with no icing)