Weighing A Patient; Mother Baby Operation; Bmi Operation; Reweigh Operation - Doran DS5200 Technical Manual

Weighing a Patient

1. Patient stands on the platform
2. The indicator will display dashes, "-----" until the patient's weight is captured.
3. The patient's weight is then displayed and beep (if enabled).
4. The weight will be held on the display until the scale turns off.
NOTE: If the patient is not stable the scale will show ERnn and then turn off.
If you have unstable patients on a regular basis Ao and AA parameters can
be adjusted to assist capturing weights for unstable patients.

Mother Baby Operation

1. Once the patient's weight is captured press ZERO.
2. The scale will display a zero weight.
3. Safely transfer the infant to the patient.
4. The scale will display the infant's weight and beep (if enabled).
5. When the patient steps off the scale with the infant, the infant's weight will be
held.

BMI Operation

1. With the held weight displayed, press the BMI button to enter the height value.
Height entry starts at 5:06.0 inches or168 cm. Pressing UNITS will change
the measurement unit. If enabled, the Units Lock feature will inhibit the
corresponding measurement unit (i.e. when kg is disabled, cm will also be
disabled).
2. Press the ▲ button to increase or the ▼ button to decrease the value. When
the correct value is displayed, press the BMI button to enter the value and the
BMI value will be displayed and held.

Reweigh Operation

1. With the patient standing on the scale platform, press REWEIGH to reinitiate
the weighing process.
2. The indicator will display dashes, "-----" until the patient's weight is captured.
3. The patient's weight is then displayed and beep (if enabled).
4. The weight will be held on the display until the scale turns off.
7