Section 3. Battery Operation; Battery Transport Mode; Charging Battery; Battery Low Indication - Doran DS5200 Technical Manual

Section 3. Battery Operation

Battery Transport Mode

During shipping, the scale is placed in a transport mode to inhibit the scale
from turning on during transit. Once fully assembled, press and hold the
ZERO button for 5 seconds. After pressing ZERO, the scale will beep
several times and then display HELLO followed by 0.0. Until you perform this
procedure the scale will be disabled.
The DS5200 physician scale has an internal rechargeable LiFePO4 battery that
offers over 5500 weighments between charges. When the scale arrives from the
factory the battery is 50% charged and can be fully charged at this time.

Charging Battery

To charge the DS5200, use the included USB A to USB C charging cable. Use
any readily available USB wall mount adapter that produces 5V and 1A or higher.
Any typical cell phone charger will fully charge the scale in 9 hours when the
battery is low. An adapter can be purchased from Doran Scales if desired. The
red/green battery indicator will show the current state of the battery charge.
During charging, the RED indicator at the center of the display will be on while the
battery is charging.
When charging is complete, a GREEN indicator at the center of the screen will be
displayed. The battery is now fully charged and will operate for over 5500
weighments.

Battery Low Indication

The lowbatt annunciator above the weight display will flash when the battery is
running low and can be charged at your convenience.
The scale must be charged when the lowbatt annunciator and LBATT flashes on
the display. The scale will operate while charging.
4