Doran DS5200 Technical Manual page 8

Waist high digital physician scale
Table of Contents

Advertisement

Power On/Off
When the patient stands on the scale, it will automatically turn on and provide the
patient's weight once a stable weight is achieved. The scale will maintain an
accurate zero between patient weighments.
Alternatively, press ZERO to turn on the indicator. The display will turn on and
display 0 weight. The indicator has an adjustable Automatic Shutoff Timer that
will turn off the indicator when not in use.
NOTE: If the scale does not turn on when a patient steps onto the scale or
by pressing the ZERO button, the scale is still in battery transport mode.
See Battery Operation for instructions as to how to turn this mode off.
Zero
When the ZERO button is pressed, the scale will reset to zero weight. This
feature can be used to zero out any weight not desired to be part of the patient
weight. Pressing ZERO while in BMI mode will return to the current held weight.
Units
Press the UNITS button to toggle between lb and kg weighing units. The current
unit will be displayed above weight digits.
NOTE: Both kg and lb are enabled by default. The Units Lock feature can
disable any unit in parameter setup.
Reweigh
To reinitiate the weighing process, press REWEIGH. This will allow a new
measurement to be taken without the patient having to leave the platform.
BMI
Enables height entry for BMI calculation.
Reset Button (Rear of scale)
Press the reset button in case the scale needs to be reset. This will reset the
scale internally and will not change any parameter settings or affect calibration.
Software Revision
To find the scales software revision, you can enter the parameter menu and scroll
to Eu setting or press the reset button located on the indicators rear panel.
6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS5200 and is the answer not in the manual?

Table of Contents