Setting Output - Omron F400 - INTRODUCTION Introduction Manual

2-3-5 Setting Output

Set the output for external device.
Set so as to the results of measurement region 0 to 2 will be output to the terminal block DO_0 to 2. The
color will be inspected depending on the region of OK (acceptable) result.
<Setting Judgement Condition>
Judgement condition is set for measuring the area of color pick up and of no picked up color. Refer to
the measurement for the displayed image. The picked up color in the measurement region of OK
result will be under inspection.
Judgement
For counting the area may be influenced by noise, set the value a little higher.
1
2
3
32
(Ex.) Yellow (lemon) is under inspection.
Measurement region 0
(DO_0)
Area=8
Measurement region
NG
(unacceptable)
"0." indicates DO_0 of terminal block.
Measurement region 1 Measurement region 2
(DO_1)
Area=3
Measurement region
Ice Cream
NG
(unacceptable) (acceptable)
Select "Judge".
(DO_2)
Area=3720
OMRON
Lemon
OK