Omron F400 - INTRODUCTION Introduction Manual page 14

Console
The F400 is operated with selecting functions from the screen and the console is used to
perform menu operations. Be sure to familiarize yourself with console operations before
actually using the menus.
Up, Down, Left,
and Right keys
Menu operations can be performed with computer via RS-232C port.
Appendix
2-1-2 Quitting
The power can be turned OFF in any mode.
But do not turn OFF the power while saving or loading the data, and be sure to save the data
before turning OFF the power so as not to lose the data. See "Operation Manual" for saving the
setting data.
Appendix Operation Manual "2-2-5 Quitting"
NOTE: Do not turn OFF the power while saving the measurement conditions in the following
procedure.Data in flash memory may be lost, and the F400 may not operate properly the next time
when it is started.
TRIGger key
ESC TRIG
ESCape key
SHIFT
SHIFT key
Operation Manual "6-2 RS-232C Port"
ENT
ENTer key
13