Starting And Quitting - Omron F400 - INTRODUCTION Introduction Manual

2-1 Starting and Quitting

2-1-1 Starting
1
Be sure that the basic F400 components have been connected correctly.
Turn ON the power supply on the monitor.
2
3
Turn ON the power supply on the F400.
See "Setup Manual" for camera setting distance and
the details of lens.
Appendix
4
The image has been taken by camera will be displayed.
Trouble shooting
Camera images do not appear on the screen.
*The Camera Cable is not properly connected.
*The lens cap has not been removed.
*The lens diaphragm is opened or closed too far.
12
NOTE: Read "Setup Manual" before attempting to setup or wire the F400 compo-
nents.
Appendix
Setup Manual "2-2 Connections", "2-3 Power Supply and Ground"
The opening screen will appear.
Setup Manual "2-4 Camera"
The following screen will appear the first
time power is turned ON.
The reversed part of the display is called
cursor. Use the cursor keys to select
items.
Vision Inspection System
F400-C10 Series
Color-Gray Menu Software
Ver. 2.00
(C) Copyright OMRON Corporation
1998-1999
All Rights Reserved
Cursor