Manual Mode - Omron E5EK - MANUAL 2 User Manual

In this mode, manual operations are possible, and the MANU" LED lights.
When this mode is selected, the manipulated variable that was active immediately
before the mode was switched to is output. When changing the manipulated variable,
change it using the
If this mode is switched to during auto tuning, auto tuning is canceled.
To select this mode when in the level 0 to 2 modes, press the
mum. To exit this mode, press the
to the level 0 mode.
Manual MV" is the only parameter available in this mode.
Manual MV
Sets the manipulated variable for manual operation. When you press the
keys, the manipulated variable is changed.
The process value is displayed on the No.1 display and the manipulated variable is
Function
displayed on the No.2 display.
The manual MV is held when the power is interrupted.
Control Method
Standard
Heating and cooling
Comment
F Related article
3.7 Adjusting Control Operation (page 3 15)
See
or keys.
A/M
key for 1 second minimum. The mode changes
Process value
Manipulated
variable
[MANU] LED
Setting Range
-5.0 to 105.0
-105.0 to 105.0

Manual Mode

A/M key for 1 second mini
Unit Default
% 0.0
% 0.0
or
5–5