Omron E5EK - MANUAL 2 User Manual page 146

USING THE E5EK-DRT IN MULTI-VENDOR APPLICATIONS
+ Slave Device Protocol
General data
Compatible DeviceNet Specifications
Vender name
Device protocol name
Manufacturer catalog number
Manufacturer revision
Physical y Network current consumption
conformance data f d t
Connector type
Physical insulation
Supported indicators
MAC ID setting
Default MAC ID
Baud rate setting
Supported baud rates
Communications Predefined Master/Slave connection set
data d t
Dynamic connection support (UCMM)
Explicit message fragmentation support
USING THE E5EK-DRT IN MULTI-VENDOR APPLICATIONS
Connecting to Another Vendor's Master
Before you connect the E5EK DRT to a master made by another vendor,
fully understand the specifications in this manual and the device profile.
Connecting to Another Vendor's Configurator
Before you use another vendor's configurator, we recommend making full
use of the E5EK DRT's file containing the parameters and operation
information of the slaves.
Create the EDS file referring to the device profile described in this manual.
For details on how to create EDS files, refer to the manual of the configura
tor you are using.
Volume I - Release 1.3
Volume II - Release 1.2
OMRON Corporation
Slaves: Generic
Manual number (H099)
1.0
30mA max. (24VDC)
Open hard wired
Yes
Module, Network
Soft setting
0
Soft setting
125 kbps, 250 kbps, and 500 kbps
Group 2 only server
No
Yes
Header ID = 47
Protocol number = 0
A–13