Backing Up Plc Data To The Computer - Omron CX-PROGRAMMER V9 - REV 12-2009 Operation Manual

OMRON

Backing Up PLC Data to the Computer

The data in the connected PLC can be backed up to the computer as a batch.
Backup folder
Default name:
C\Backup\yymmdd_hhmmss
Overview of Procedure
PLC Backup Tool
Backup
Note: When the Backup from PLC Button is clicked, the Tool will connect to the PLC that is
specified in the current communications settings. Check that the target PLC and
network type are correct before performing the backup procedure.
Select PLC Backup Tool
from the Tools Menu of the
Start
CX-Programmer.
Communi- The communications settings
cations are inherited from the
settings
Check the target PLC in the Confirm Connection Dialog Box and
(The PLC Backup Tool will connect online to the PLC and the
Backup from PLC (1/2) Dialog Box will be displayed.)
Backup
Select the check boxes for the Units to be backed up and then click
Target PLC
CPU Unit + Configuration Units
(CPU Bus Units and Special I/O Units)
Select Programs – OMRON –
CX-One – CX Programmer –
PLC Backup Tool from the
Windows Start Menu.
↓
Click the Communication
Settings Button in the PLC
Backup Tool Dialog Box.
Select the PLC Direct
Connection or Connection via
Gateway Option and click the
Change Settings Button.
CX-Programmer.
Set the target PLC in the
Change PLC Dialog Box.
(The PLC Backup Tool Dialog
Box will return.)
↓
Click the Backup from PLC Button.
↓
click the OK Button.
↓
↓
the Next Button.
↓
Specify the backup file in which to save the data.
↓
Click the Start Button.
↓
Backup operation executed.
PART 2: CX-Server PLC Tools
CHAPTER 12 – PLC Backup Tool
↓
↓
↓
↓
↓
CX-Server PLC Tools_ Page 147