Omron CX-PROGRAMMER V9 - REV 12-2009 Operation Manual page 535

OMRON
Rotary switch
Routing table
Routing
RS232
RS422
Serial Connection
Server
Slots
Stop bits
Symbol
SYSMAC LINK
SYSMAC NET
SYSMAC WAY
System area
System configuration
Tagged database
Target PLC
Taskbar
TCP/IP
Temperature Controller
Temporary Relay Area
Text
Timer area
Toolbus
Tools
Transfer from PLC
Transfer to PLC
UDP
Unit number
Units
Revision 2.0
Indicates the method of calling a device by generating a series of pulses.
A table containing the information necessary to allow communications between
different networks including local and gateway network address details.
The direction of data across a network from its source to its destination.
Industrial interface standard for serial communications.
Industrial interface standard for serial communications employing balanced line
circuits.
A direct connection between computer and PLC.
1. Server is used in DDE functions to contain a link to an outside application. Using
DDE functions, CX-Server allows the manipulation of an outside application as
specified as the Server.
Refer also to Server application.
2. A Server is the central processing point of a Network which is accessible to all
computers. Networks affect CX-Server in that further associated options are
available if the computer Network is connected.
Free areas within a rack to which units can be fixed.
Bits indicating the end of transmission of each set of data bits; normally one or two
bits, they indicate the delay time between sending successive characters down the
line.
An address that has been given a name to make the address information more
flexible. Symbols are inherited by CX-Server by the invoking application.
OMRON high speed industrial network (either co-axial or fibre optic).
OMRON high speed optical LAN which can be of type C SYSMAC NET or CV
SYSMAC NET.
OMRON network.
An area of memory used for controlling and managing a unit.
An arrangement of units, for example network, computers and PLCs.
A file format supported by the CX-Server Import tool. The Tagged database is also an
export format of the CX-Server Import tool.
The PLC to which information or instructions are directed.
An integral part of Microsoft Windows which allows Microsoft Windows based
applications to be started. CX-Server tools are run from the Taskbar.
Transmission Control Protocol/Internet Protocol.
An OMRON device.
An area of PLC memory containing instructions which can be loaded at a later point
for use with other instructions.
1. A file format supported by the CX-Server Import tool. The Text is also an export
format of the CX-Server Import tool.
2. A data format supported by CX-Server.
An area of PLC memory containing program timers and their related completion
flags.
A network, either C-Toolbus or CV-Toolbus, allowing communications with a device
via the serial COM port of a personal computer (in a similar manner to SYSMAC
WAY). Data is transmitted along the network in binary format.
CX-Server is made up of four tools.
The transfer of a program or data to a host (either a computer or a programming
device) from a lower-level (or slave) device.
The transfer of a program or data from a host (either a computer or a programming
device) to a lower-level (or slave) device.
User Datagram Protocol.
A number identifying an individual component of an OMRON PLC system
configuration.
A component of an OMRON PLC system configuration.
PART 3: CX-Server Runtime
GLOSSARY OF TERMS – CX-Server Runtime
CX-Server Runtime_Page 91