Setting The Csv Tags In Advance; Automatically Creating The Ns-Series Pt Screen For The Loop Controller - Omron CX-PROCESS TOOL - INTRODUCTION GUIDE Introduction Manual

Making the NS-series PT Screen
for the Loop Controller
1
1
1

Setting the CSV Tags in Advance

Setting the CSV Tags in Advance
2
CSV tags must be set in advance (i.e.,
before creating the NS-series PT
screen for the Loop Controller).
Right-click 001.Basic PID in the tree in
the window on the left and select Tab
Setting - CSV Tag from the pop-up
menu.
Input the Scaling Upper Limit, Scaling
Lower Limit, DP (i.e., decimal point
position), and Unit. Click the OK
Button.
2
2

Automatically Creating the NS-series PT Screen for the Loop Controller

Automatically Creating the NS-series PT Screen for the Loop Controller
Automatically create the NS-series PT
screen for the Loop Controller.
Start the Face Plate Auto-Builder for
NS (NSFP) and the project for the CX-
Designer will be generated
automatically.
Select Execute - Create Tag File -
Start NSFP from the menu.
2-2
2-1. Start the Face Plate Auto-Builder for NS (NSFP)
at the same time as creating tag files.
I can make it
all by myself!
1-1. Right-click 001.Basic PID and select Tab Setting -
CSV Tag.
Click the OK Button.
2-1-1. Select Execute - Create Tag File -
Start NSFP.