The function block can be moved
without restriction by dragging it with
the mouse.
Next, paste the Basic PID Block. Just
as in the previous procedure, right-
click and select Register - Control
Block.
A window for selecting the function
block will open. Click the Down-
Arrow
.
Select Basic PID from the function
block names and click the Insert
Button.
4-3-4.
Move the function block
to the desired location.
4-4.
Register the Basic PID Block.
4-4-1.
4-4-3.
Right-click and select
Register - Control Block.
4-4-2.
Select the control block.
Click.
Select Basic PID and
click the Insert Button.
4
1-7