Omron CX-PROCESS TOOL - INTRODUCTION GUIDE Introduction Manual page 21

The Network Settings [Toolbus]
Window will open. Click the Driver
Tab.
Set the Port Name to the actual port to
be used, and then click the OK Button
to close the window.
The communications setting will be
completed once the OK Button is
clicked once again.
Click the Driver Tab.
7-2-3.
7-2-4. Set the COM port for
the computer.
Click the OK Button.
Click the OK Button.
With the CX-Process Tool, an online connection
will be made automatically when online operations,
such as downloading, are performed after making
the communications settings described above.
7
1-13