Making A New Project - Omron CX-PROCESS TOOL - INTRODUCTION GUIDE Introduction Manual

Creating Simple Function Block Data for
the Loop Controller
1
1
1
Starting the CX-Process Tool
Starting the CX-Process Tool
2
From the Start Menu, select All
Programs - OMRON - CX-One - CX-
Process Tool - CX-Process Tool to
start the CX-Process Tool.
2
2

Making a New Project

Making a New Project
The window at the right will open when
the CX-Process Tool starts.
First, make a project.
Click the Make a New Function Block
File Button
to make a new project.
1-2
2-1. Make a new project.
1. Select CX-Process Tool.