Omron CX-PROCESS TOOL - INTRODUCTION GUIDE Introduction Manual page 11

Select a folder in which to save the
data, and then click the OK Button.
The window at the right will open when
the OK Button is pressed. Enter the
project name.
The folder in which the project name
was entered (called the project folder)
will be created in the window on the left
(called the project workspace).
G For example, enter
"Temperature
Control."
2-4. A project folder called "Temperature Control" is created.
2-2. Select the folder in which
to save the data.
Click the OK Button.
2-3. Enter the project
name.
2
1-3