Registering The Loop Controller - Omron CX-PROCESS TOOL - INTRODUCTION GUIDE Introduction Manual

Creating Simple Function Block Data for
the Loop Controller
3
3

Registering the Loop Controller

Registering the Loop Controller
Next, register the Loop
3
Controller to be used.
Right-click the Project Folder
and select Insert.
A dialog box for selecting the Loop
Controller will open.
The Loop Controller to be used is a
CJ-series Loop-control CPU Unit.
Therefore, first select Loop CPU
Unit/Process Unit for the LC type.
Next, select the model number and
LCB Unit version. The model number
is the CJ1G-CPU45P and the version
is 3.0.
1-4
3-1.
3-3. Select the model number and the LCB Unit version
in the Unit Information Field. Select CJ1G-CPU45P
for the model number and 3.0 for the version.
Click the OK Button.
Right-click the Temperature
Control Folder and select Insert.
Select the Loop CPU
3-2.
Unit/Process CPU Option
for the LC type.