Input Specifications - Omron CP1L CPU UNIT - 03-2009 Operation Manual

Specifications
I/O Terminal Blocks of CPU Units with 10 I/O Points
Output Terminal Block (Bottom Block)
AC Power Supply Models
+
00
−
COM COM
CIO 100
Setting Functions Using Instructions and PLC Setup
Address When the
instructions to
the right are not
executed
Word Bit Normal outputs
CIO 100 00 Normal output 0
01 Normal output 1
02 Normal output 2
03 Normal output 3

Input Specifications

Normal Inputs
Item
High-speed Counter Inputs
Input voltage
24 VDC
Applicable inputs 2-wire and 3-wire sensors
Input impedance 3.0 kΩ
Input current 7.5 mA typical
ON voltage 17.0 VDC min.
OFF voltage/current 1 mA max. at 5.0 VDC max.
2.5 μs max.
ON delay
64
01 02
COM 03
When a pulse output
instruction (SPED, ACC,
PLS2, or ORG) is executed
Fixed duty ratio pulse output
CW/CCW Pulse plus
direction
Pulse output Pulse output
0 (CW) 0 (pulse)
Pulse output Pulse output
0 (CCW) 0 (direction)
Pulse output Pulse output
1 (CW) 1 (pulse)
Pulse output Pulse output
1 (CCW) 1 (direction)
CIO 0.00 to CIO 0.03
+10%
/
−15%
DC Power Supply Models
00
NC
COM COM COM
NC
CIO 100
When origin searches are
enabled in PLC Setup, and an
origin search is executed with
ORG instruction
+ When the origin search
function is used
---
---
---
Origin search 0 (Error counter
reset output)
Specification
Interrupt Inputs and
Quick-response Inputs
CIO 0.04 to CIO 0.09 (See
note 1.)
3.0 kΩ
7.5 mA typical
17.0 VDC min.
1 mA max. at 5.0 VDC max.
50 μs max.
Section 2-2
01 02
03
When the PWM
instruction is
executed
Variable duty ratio
pulse output
PWM output
---
PWM output 0
---
PWM output 1
Normal inputs
CIO 0.10 to CIO 0.11 and
CIO 1.00 to 1.11 (See note 2.)
4.7 kΩ
5 mA typical
14.4 VDC min.
1 mA max. at 5.0 VDC max.
1 ms max. (See note 3.)