Integra Integralift 230 Service Manual page 14

Integralift beeps while lifting patient:
1. Check that the patients weight does not exceed the safe working load (SWL)
2. Check the charger being connected and displaying green or yellow light.
3. Is something clogging the lifting strap or driving mechanism?
4. Insert programming cable in controller card:
a. Check what triggered last alarm.
b. Check that the power limit in the controller card is set at 85 (equivalent of 8,5
Amper)
c. Check that the voltage limit is set at 20 (equivalent of 20V)
5. If Integralift is still not working; contact Integra or your local retailer.
Integralift beeps continuously:
Voltage from batteries too low.
1. Check that the charger is properly connected, from wall outlet to circuit board.
2. Check that charger light changes when lifting up and down with load.
3. Check fuses on circuit board (UK: Check fuse in outlet/plug)
4. If Integralift still beeps, contact Integra or your local supplier.
Integralift emitting noise/dissonance:
1. Is the noise coming from the structure or the walls or ceiling?
a. Check that fastening to room features is done correctly and all screws
sufficiently tightened.
b. Check that noise disappears during usage, if not; contact Integra or your local
retailer.
2. Is the noise coming from bearings between the jibs and/or structure?
a. Identify the source of the noise and add a small amount of teflon lubricant
between steelbracket and the bolt (not at plastics)
b. Check that noise disappears during usage, if not; contact Integra or your local
retailer.
3. Is the noise coming from drum, lifting strap, or motor bracket?
a. Identify the source of the noise and add a small amount of teflon lubricant
between the metal parts.
b. Perform a visual inspection of lifting strap with drum and attachments, and
make sure everything is working accordingly.
c. Check that noise disappears during usage, if not; contact Integra or your local
retailer.
In the event of other errors; contact Integra or your local supplier.
Integralift 230 – Servicemanual rev2.6 14