Led Indicators - HMS Networks Ewon Netbiter EC360W Startup Manual

Installation
2.3

LED Indicators

All indicators will light up while the unit is starting up. When the startup
sequence has completed they will indicate system status.
In case of an Uplink/WAN error, check the network and firewall settings. If using
DHCP, also check that the DHCP server is active.
LED
Modem
CAN
RS232/RS485
Uplink/WAN
Gateway
Power
Netbiter EC300 Series Startup Guide
Indication
Off
Red
Red, flashing
Orange
Orange, flashing
Green, flashing
Green
Off
Red
Green
Off
Red
Green
Off
Red
Red, flashing
Green
Off
Red
Red, flashing
Green, flashing
Green
Off
Green
Meaning
Modem disabled
Modem failure
SIM card failure
PIN code enabled on SIM card
APN (Access Point Name) not set
Searching for mobile network
Connected to mobile network
Port disabled
Port failure
Port enabled
Port disabled
Port failure
Port enabled
No link
No valid IP address
No connection to Argos
Connected to Argos
No power or initializing
Hardware failure
Application failure
Firmware update in progress
Unit is operational
No power
Unit has power
12 (20)
SP3309 2.0 en-US