Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DFI KSM150P-KH
Summary of Contents for DFI KSM150P-KH
- Page 1 KSM-KH Series Modular-Designed Industrial Panel PC User’s Manual A-536-M-2009...
-
Page 2: Copyright
Copyright FCC and DOC Statement on Class A This publication contains information that is protected by copyright. No part of it may be re- This equipment has been tested and found to comply with the limits for a Class A digital produced in any form or by any means or used to make any transformation/adaptation without device, pursuant to Part 15 of the FCC rules. -
Page 3: Table Of Contents
Table of Contents COM1/COM2 RS232 Power Select ........... 18 Copyright ............. 2 DIO Power Source Select (Pins 0~7) ........18 Trademarks ............2 COM1/COM2 RS232/422/485 Select ........19 FCC and DOC Statement on Class A ..... 2 COM3/COM4 RS232/422/485 Select ........20 About this Manual .......... -
Page 4: About This Manual
About this Manual Static Electricity Precautions An electronic file of this manual can be obtained from the DFI website at www.dfi.com.To It is quite easy to inadvertently damage your PC, system board, components or devices even download the user’s manual from our website, please go to “Support” > “Download Center.”... -
Page 5: Safety Precautions
Safety Precautions About the Package • Use the correct DC input voltage range. The package contains the following items. If any of these items are missing or damaged, please contact your dealer or sales representative for assistance. • Unplug the power cord before removing the system chassis cover for installation or servic- ing. -
Page 6: Chapter 1 - Introduction
Chapter 1 Chapter 1 Chapter 1 - Introduction Overview Key Features Model Name KSM-KH Processor ® 7th Generation Intel Core™ Processors, BGA 1440 Chipset Intel ® CM238/QM175 Chipset 2 LAN ports 4 COM ports Display DVI-D (DVI-I connector) or HDMI HDMI or DP++ Top View 4 USB 3.0 &... -
Page 7: Specifications
Chapter 1 Chapter 1 Specifications Ethernet One Intel ® I210IT PCIe (10/100/1000Mbps) One Intel I219LM with iAMT11.0 PCIe (only Intel® Xeon® & Core™ i7/i5 ® support iAMT) Expansion One full-size/half-size Mini PCIe with Mini SIM socket (PCIe/USB) Processor System 7th Generation Intel ®... -
Page 8: Getting To Know The Ksm-Kh
Chapter 1 Chapter 1 Getting to Know the KSM-KH Bottom View Top View Power Button DVI-D Status LED (Orange) (DVI-I connector) HDD LED (Red) USB 3.0 COM 2 COM 1 DC-in HDMI COM 3 COM 4 Reset Button LAN 1 Extended Power USB 2.0 on/off Switch... -
Page 9: Mechanical Dimensions
Chapter 1 Chapter 1 Mechanical Dimensions Panel View* Power HDD (green) (orange) Backlight or Power Volume Control Brightness Top View on/off Control Alarm LED The front OSD is capable of controlling the system in the following ways in addition to its 235.00 explicit functions. -
Page 10: Chapter 2 - Getting Started
Installing the Drivers The system package includes a CD disk. The CD includes drivers that must be installed to provide the best system performance. Refer to the Supported Software chapter for instructions on installing the drivers. Chapter 1 Introduction www.dfi.com... -
Page 11: Chapter 3 - Installing The Devices
The modular panel PC comprises two parts: a box module and a panel module. The assembly of these two parts is easy thanks to DFI's ADP (Adaptive Display Platform) innovation, which makes the box modules and the panel modules interchangeable. Please use the following procedure to assemble these two parts. -
Page 12: Removing The Chassis Cover
Chapter 3 BIOS SETTING Removing the Chassis Cover Please follow these guidelines before performing any installation procedures: Make sure the system and all other peripherals connected to it have been powered off. The SODIMM sockets, Mini PCIe slots, M.2 slot and SATA drive bay are accessible after removing the chassis cover. -
Page 13: Installing A Sodimm
Chapter 3 BIOS SETTING Installing a SODIMM Grasp the module by its edges and align the memory’s notch with the socket’s notch. Then insert the memory into the socket at an angle and push it down until you feel a click. The system supports two DDR4 SODIMM socket. -
Page 14: Installing A 2.5" Sata Drive
Chapter 3 BIOS SETTING Installing a 2.5” SATA Drive Connect the other end of the SATA data and power cable to the SATA data and power connectors on the system board respectively. The system can accommodate one SATA drive. Please use the following procedure to install a SATA drive in the system. -
Page 15: Installing A Mini Pcie And Sim Card
Chapter 3 BIOS SETTING Installing a SIM Card Installing a Mini PCIe and SIM Card Open the Mini SIM card socket by pushing the white latch inward. The system board is equipped with 2 Mini PCIe slots with Mini SIM card sockets to support a variety of wireless LAN and mobile broadband communication modules. -
Page 16: Installing An M.2 Card
Chapter 3 BIOS SETTING Installing an M.2 Card The onboard M.2 Type 2280 connector (M Key) supports PCIe NVMe modules up to PCIe Gen 3.0 x4 bandwidth. Note that only SKUs with Intel QM175 Chipset support M.2 socket. ® To install an M.2 card, insert the bottom edge of the M.2 card into the connector, and then secure the card to the standoff with the provided mounting screw. -
Page 17: Chapter 4 - Jumper Settings
Chapter 5 RAID PS/2 KB/MS Power Select Chapter 4 - Jumper Settings Clear CMOS Data Clear CMOS Data (JP1) Front Audio Front Panel JP14 PS/2 Power Select (JP4) (JP14) Clear CMOS DIO Power Data (JP1) Front Panel Front Audio Power Button Buzzer PS/2 Power Select USB 2.0... -
Page 18: Com1/Com2 Rs232 Power Select
Chapter 5 RAID COM1/COM2 RS232 Power Select DIO Power Source Select (Pins 0~7) Clear CMOS Data (JP1) Front Panel Front Audio Clear CMOS Data (JP1) Front Panel Front Audio PS/2 Power Select (JP4) (JP14) DIO Power PS/2 Power Select (JP4) (JP14) Power Button DIO Power... -
Page 19: Com1/Com2 Rs232/422/485 Select
Chapter 5 RAID COM1/COM2 RS232/422/485 Select COM1 / COM2 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 Clear CMOS Data (JP1) Front Audio Front Panel PS/2 Power Select (JP4) (JP14) DIO Power 6 7 8 9 6 7 8 9 6 7 8 9 Power Button... -
Page 20: Com3/Com4 Rs232/422/485 Select
Chapter 5 RAID COM3/COM4 RS232/422/485 Select COM3 / COM4 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 Clear CMOS Data (JP1) Front Panel Front Audio PS/2 Power Select (JP4) (JP14) DIO Power Power Button Buzzer USB 2.0 DDR4_2 SODIMM... -
Page 21: Chapter 5 - Ports And Connectors
Chapter 5 RAID USB Ports Chapter 5 - Ports and Connectors Top Panel I/O Ports Clear CMOS Data (JP1) Front Panel Front Audio PS/2 Power Select (JP4) (JP14) DIO Power Power Button Buzzer USB 2.0 DDR4_2 SODIMM USB 9 USB 2.0 Power LED HDD LED USB 13/14... -
Page 22: Display Interfaces
Chapter 5 RAID Display Interfaces RJ45 LAN Ports Parallel Front Audio Buzzer S/PDIF Auto Power-on Clear CMOS Front Data (JP1) Front Panel Select (JP11) Front Audio DIO Power Panel USB 2.0 PS/2 Power Select (JP4) Power Button USB 2.0 13-14 (JP14) DDR4_1 SODIMM DIO Power... -
Page 23: 9~36V Dc-In
Chapter 5 RAID 9~36V DC-in Bottom Panel I/O Ports Clear CMOS Data (JP1) Front Panel Front Audio PS/2 Power Select (JP4) (JP14) DIO Power Power Button Buzzer USB 2.0 DDR4_2 SODIMM Power Button USB 9 USB 2.0 Power LED HDD LED USB 13/14 COM 5 DDR4_1 SODIMM... -
Page 24: Com (Serial) Ports
Chapter 5 RAID COM (Serial) Ports USB Ports USB 2.0 Clear CMOS Data (JP1) Front Audio Front Panel Clear CMOS Data (JP1) Front Audio Front Panel USB 9 PS/2 Power Select (JP4) (JP14) DIO Power PS/2 Power Select (JP4) (JP14) Power Button Buzzer DIO Power... -
Page 25: I/O Connectors
Chapter 5 RAID I/O Connectors SATA (Serial ATA) Connectors PS/2 KB/MS Connector Clear CMOS Data (JP1) Front Audio Front Panel PS/2 Power Select (JP4) (JP14) DIO Power Clear CMOS Data (JP1) Front Panel Power Button Front Audio Buzzer USB 2.0 DDR4_2 SODIMM USB 9 PS/2 Power Select... -
Page 26: Sata (Serial Ata) Power Connectors
Chapter 5 RAID SATA (Serial ATA) Power Connectors SMBus Connector Clear CMOS Clear CMOS Data (JP1) Front Panel Front Audio Data (JP1) Front Panel Front Audio PS/2 Power Select PS/2 Power Select (JP4) (JP4) (JP14) (JP14) DIO Power DIO Power Power Button Buzzer Power Button... -
Page 27: Rear Audio Connector
Chapter 5 RAID Rear Audio Connector Digital I/O Connector & DIO Power Clear CMOS Data (JP1) Front Panel Front Audio Clear CMOS Data (JP1) Front Panel Front Audio PS/2 Power Select (JP4) (JP14) PS/2 Power Select (JP4) DIO Power (JP14) DIO Power Power Button Buzzer... -
Page 28: Front Panel Connector
Chapter 5 RAID Front Panel Connector 12V DC-out Front Panel Clear CMOS Data (JP1) Front Panel Front Audio PS/2 Power Select (JP4) (JP14) ATX-SW DIO Power Buzzer Power Button PWR-LED USB 2.0 DDR4_2 SODIMM USB 9 Clear CMOS Data (JP1) Front Panel Power LED Front Audio... -
Page 29: Expansion Slots
Chapter 5 RAID Expansion Slots LPC Connector Clear CMOS Data (JP1) Front Panel Front Audio PS/2 Power Select (JP4) (JP14) Clear CMOS DIO Power Data (JP1) Front Panel Front Audio Power Button Buzzer PS/2 Power Select USB 2.0 DDR4_2 SODIMM (JP4) (JP14) USB 9... -
Page 30: Remote Power Switch
Chapter 5 RAID Remote Power Switch Clear CMOS Data (JP1) Front Audio Front Panel PS/2 Power Select (JP4) (JP14) DIO Power Power Button Buzzer USB 2.0 DDR4_2 SODIMM USB 9 Power LED USB 2.0 HDD LED USB 13/14 COM 5 DDR4_1 SODIMM SPI Flash Reset... -
Page 31: Chapter 6 - Mounting Options
Chapter 5 RAID Chapter 6 - Mounting Options Attach the other bracket (VESA mount bracket 2) to the rear of the Panel PC. VESA Mount The VESA-mount specifications for this device is 100 x 100 (mm). Please use a compatible VESA mount kit that can sustain the weight and size of this device. - Page 32 Chapter 5 RAID Panel Mount The panel mounting kit includes the following: • 10 mounting clamps Mounting clamp Select a place on the panel (or wall) where you will mount the Panel PC. Cut out a shape on the panel that corresponds to the Panel PC’s rear dimensions (15": 367mm x 300mm;...
-
Page 33: Chapter 7 - Bios Setup
Chapter 5 RAID Chapter 7 - BIOS Setup Legends Overview Keys Function The BIOS is a program that takes care of the basic level of communication between the CPU and peripherals. It contains codes for various advanced features found in this system board. The BIOS allows you to configure the system and save the configuration in a battery-backed Right and Left arrows Move the highlight left or right to select a menu... -
Page 34: Main
Chapter 5 RAID Insyde BIOS Setup Utility Advanced The Advanced menu allows you to configure your system for basic operation. Some entries are defaults required by the system board, while others, if enabled, will improve the performance of your system or let you set some features according to your preference. Main The Main menu is the first screen that you will see when you enter the BIOS Setup Utility. - Page 35 Chapter 5 RAID CPU Configuration ACPI Settings This section configures the CPU. This section configures system’s ACPI parameters. Wake on LAN Intel SpeedStep™ ® Enable or disable the Enhanced Intel SpeedStep Technology, which helps optimize Enable or disable WOL (wake-on-LAN) to wake the system through an ®...
- Page 36 Chapter 5 RAID Video Configuration Internal Graphics Device This section configures the video settings. Note that the configuration options vary depending Enable, disable or automatically detect the internal graphics. on the “Boot type” selected in the “Boot” menu. Boot display Prioritize device combination for display during system boot.
- Page 37 Chapter 5 RAID Audio Configuration SATA Configuration This section configures the audio settings. This section configures SATA controllers. SATA Controller(s) Enable or disable Serial ATA controllers. HD Audio SATA Speed Control the detection of the high-definition audio devices. Select Serial ATA device speed from Gen1 (1.5 Gbit/s), Gen2 (3 Gbit/s), Gen 3 (6 Gbit/s) or auto.
- Page 38 Chapter 5 RAID USB Configuration requires that a PCIe NVMe module and a Windows* 10 x64 bit (Version 1703/Build 15063) or later versions installed with a more recent version of the Intel ® Rapid Storage Technology (Intel ® This section configures the parameters of the USB devices. RST) driver and application.
- Page 39 Chapter 5 RAID PCI Express Configuration This section configures the settings of PCI Express root ports. PCI Express Configuration For each PCIe root port above, press “Enter” to configure its speed and hog plug function. Select a device associated with a PCI Express root port and press “Enter” to configure: Intel I210 Enable/Disable Intel I219...
- Page 40 Chapter 5 RAID ME Configuration Active Management Technology Support The section allows you to enable or disable the Intel Active Management Technology (Intel ® ® This section configures flashing of the Intel Management Engine. ® AMT) BIOS extension. Refer to Chapter 10 - Intel AMT Settings for more information. Note that this function is not available for the Intel Core™...
-
Page 41: Uefi Device Manager
Chapter 5 RAID UEFI Device Manager Network Device List This Device Manager menu is used to configure UEFI network settings when the “Network The “Device Manager” screen is displayed. And if the “Network Stack” or the “PXE Boot to Stack” is enabled in the “Dual” or “UEFI” boot mode or when the PXE Boot to LAN is enabled LAN”... - Page 42 Chapter 5 RAID Blink LEDs IPv6 Network Configuration If you select to use IPv6 network settings, enter the Interface ID (64 bit). Enter the duration (seconds) for the Ethernet’s LED to blink to indicate its presence. Policy: Select either automatic or manual. And select "Advanced Configuration" to configure IPv6 network address manually if the manual option is selected.
- Page 43 Chapter 5 RAID Super IO Configuration This section configures the system super I/O chip parameters. COM Port 1 and COM Port 6 SYS Smart Fan/CPU Smart Fan/SYS Smart Fan 2 Control Enable or disable each serial port. Enable or disable the smart fan control. Disable Disable this serial port.
- Page 44 Chapter 5 RAID PC Health Status This section displays PC health information such as the voltages and CPU and system temperatures. User's Manual | KSM-KH...
- Page 45 Chapter 5 RAID Console Redirection Console redirection lets you monitor and control the system from a remote station by re- COMA to COMF directing the host screen output through a serial port. Enable or disable the serial redirection function for each of the serial ports on the sys- tem.
-
Page 46: Security
Chapter 5 RAID Security This section configures the security for the BIOS Setup utility and the optional Trusted Platform Module (TPM) function. Set Supervisor Password Set the administrative password for entering the BIOS utility or upon entering the power-on self-test (POST) process. The length of the password must be greater than 1 character and less than or equal to 10 characters. -
Page 47: Boot
Chapter 5 RAID Boot Boot Device Priority This section configures legacy or EFI boot order or both depending on the “Boot Type” selected. This section configures boot options. Numlock Select the power-on state for the Num Lock key. Boot Type Select the boot type. -
Page 48: Exit
Chapter 5 RAID Exit This section configures the parameters for exiting the BIOS setup utility. Exit Saving Changes Select this field and press <Enter> to exit BIOS setup and save your changes. Load Optimal Defaults Select this field and press <Enter> to load the optimal defaults. Discard Changes Select this field and press <Enter>to exit the BIOS setup without saving your changes. - Page 49 Chapter 5 RAID Updating the BIOS Notice: BIOS SPI ROM To update the BIOS, you will need an updated BIOS file and a flash utility. Please contact 1. The Intel Management Engine has already been integrated into this system board. Due to ®...
-
Page 50: Chapter 8 - Supported Software
“Setup”. If your product package does not include a CD/DVD, you can download the latest drivers from the DFI Download Center: http://www.dfi.com/DownloadCenter Once you are on the Download Center page, select your product or type the model name and click "Search"... - Page 51 Chapter 5 RAID Intel Chipset Device Software 3. Go through the readme document for system re- The Intel ® Chipset Device Software is used for updating Windows ® INF files so that the Intel quirements and installation chipset can be recognized and configured properly in the system. tips, and then click “Next”.
- Page 52 Chapter 5 RAID Intel Graphics Driver 3. Go through the readme document for system re- quirements and installation To install Intel Graphics Driver, follow these steps: ® tips, and then click “Next”. 1. Setup is now ready to install the graphics driver. Click “Next”...
- Page 53 Chapter 5 RAID Intel LAN Driver 4. Click “Install” to begin the installation. To install the Intel ® LAN Driver, follow these steps: 1. Setup is preparing to install the driver. Click “Next” to continue. 5. After the installation is complete, click “Finish”.
- Page 54 Chapter 5 RAID Intel ME Driver 3. Setup is currently installing the driver. After the instal- To install the Intel ® Management Engine (Intel ® ME) Driver, follow these steps: lation is complete, click “Next.” 1. You are about to install the driver.
- Page 55 Chapter 5 RAID Audio Driver Intel Serial IO Driver To install the audio driver, follow these steps: To install Intel ® Serial IO Driver, follow these steps: 1. Setup is now ready to install the au- 1. Setup is ready to install the driver. dio driver.
- Page 56 Chapter 5 RAID 3. Read the file information and then 5. Setup is now installing the driver. click “Next”. 6. Click “Finish” to exit the setup. 4. Setup is ready to install the driver. Click “Next” to begin the installation. User's Manual | KSM-KH...
- Page 57 Chapter 5 RAID Intel Rapid Storage Technology Driver Audio Drivers ® The Intel Rapid Storage Technology is a utility that allows you to monitor the current sta- To install the driver, click “Audio Drivers” on the main menu. tus of the SATA drives. It enables enhanced performance and power management for the storage subsystem.
- Page 58 Chapter 5 RAID PenMount Windows Universal Driver 4. Setup is currently installing the utility. To install the PenMount Windows driver, follow these steps: 1. Setup is ready to install the driver. Click “Next” to con- tinue. 4. Choose whether you would like to use PenMount touch features.
Need help?
Do you have a question about the KSM150P-KH and is the answer not in the manual?
Questions and answers