Specifications - Sennheiser 100 - 01-09 Instruction Manual

Specifications

EM 100
RF characteristics
Modulation
Receiving frequency ranges
Receiving frequencies
Switching bandwidth
Nominal/peak deviation
Receiver principle
Sensitivity (with HDX, peak deviation)
Adjacent channel rejection
Intermodulation attenuation
Blocking
Squelch
Pilot tone squelch
Antenna inputs
AF characteristics
Compander system
EQ presets (switchable,
affect the line and monitor outputs):
Preset 1: "Flat"
Preset 2: "Low Cut"
Preset 3: "Low Cut/High Boost"
Preset 3: "High Boost"
S/N ratio (1 mV, peak deviation)
THD
AF output voltage
(at peak deviation, 1 kHz AF)
Adjustment range of audio output level
Overall device
Temperature range
Power supply
Current consumption
Dimensions
Weight
wideband FM
516–558, 566–608, 626–668, 734–776,
780–822, 823–865 MHz (A to E, G, see page 4)
1,680 frequencies, tuneable in steps of 25 kHz
20 frequency banks, each with up to 12 factory-preset
channels, intermodulation-free
1 frequency bank with up to 12 user programmable
channels
42 MHz
24 kHz / 48 kHz
true diversity
2,5 μV for 52 dBA
rms S/N
typ. 65 dB
typ. 65 dB
70 dB
Off, Low: 5 dB V, Middle: 15 dB V, High: 25 dB V
can be switched off
2 BNC sockets
Sennheiser HDX
–3 dB at 180 Hz
–3 dB at 180 Hz
+6 dB at 10 kHz
+6 dB at 10 kHz
110 dBA
0.9%
¼'' (6.3 mm) jack socket (unbalanced): +12 dBu
XLR socket (balanced): +18 dBu
48 dB (in steps of 3 dB)
+6 dB gain reserve
–10°C to 55°C
12 V
300 mA
approx. 190 x 212 x 43 mm
approx. 980 g
Specifications
31