Cleaning The Devices - Sennheiser 100 - 01-09 Instruction Manual

Display
Main menu
Sensitivity
Frequency Preset*
Name*
Auto Lock
Advanced
Exit
Extended menu "Advanced Menu"
Tune
Mute Mode (SK only)
Cable Emulation (SK only)
Pilot Tone*
LCD Contrast
Reset
Software Revision
Exit
* For information on the sychronization of transmitters with receivers, refer to 20.
CAUTION!
Function of the menu item
Adjusts the sensitivity "AF"
Changes the frequency bank and the channel
Enters a freely selectable name
Activates/deactivates the automatic lock mode
Calls up the extended menu
Exits the operating menu and returns to the current standard display
Sets the transmission frequencies for the frequency bank "U"
Special function: Sets a channel and a transmission frequency for the frequency bank "U"
Select this menu item and call it up by pressing the
switch (SKM) until the channel selection appears.
Sets the mode for the MUTE
Emulates guitar cable lengths/guitar cable capacities
Activates/deactivates the pilot tone transmission
Adjusts the contrast of the display panel
Resets the bodypack transmitter/radio microphone
Displays the current software revision
Exits the extended menu "Advanced

Cleaning the devices

Liquids can damage the electronics of the devices!
Liquids entering the housing of the devices can cause a short-circuit and damage the
electronics.
Keep all liquids away from the devices.
EM 100
Before cleaning, disconnect the device from the mains.
Use a slightly damp cloth to clean the receiver from time to time. Do not use any solvents
or cleansing agents.
SK 100
Use a slightly damp cloth to clean the bodypack transmitter from time to time. Do not
use any solvents or cleansing agents.
SKM 100
Use a slightly damp cloth to clean the radio microphone from time to time. Do not use any
solvents or cleansing agents.
"Advanced Menu"
SET
switch
Menu" and returns to the main menu
Cleaning the devices
button (SK)/the multi-function
27