Skm 100 Radio Microphone - Sennheiser 100 - 01-09 Instruction Manual

To detach the belt clip:
Lift one side of the belt clip as shown in the diagram on the right-hand side.
Press down the belt clip at one fixing point and pull it out of the transmitter housing.
Repeat for the other side.

SKM 100 radio microphone

Inserting the batteries/accupack
For powering the radio microphone, you can either use two 1.5 V AA size batteries or the
rechargeable Sennheiser BA 2015 accupack.
Unscrew the lower part of the radio microphone from the radio microphone's body
»
turning it counterclockwise.
Slide back the lower part of the radio microphone as far as it will go.
Open the battery compartment cover
Insert the batteries or the BA 2015 accupack as shown on the battery compartment
cover. Observe correct polarity when inserting the batteries/accupack.
Close the battery compartment cover
Push the battery compartment into the radio microphone's body.
Screw the lower part of the radio microphone back to the radio microphone's body ».
When unscrewing the radio microphone during operation, the muting function is
automatically activated. "MUTE" appears on the display panel.
When screwing the lower part of the radio microphone back to the radio micro-
phone's body, the muting function is deactivated.
Putting the devices into operation
.
.
»
by
15