Sennheiser 100 - 01-09 Instruction Manual page 16

Putting the devices into operation
³
ME 2/ME 4
ME 3
14
Charging the accupack
To charge the BA 2015 accupack:
Insert the bodypack transmitter into the L 2015 charger (optional accessory).
The L 2015 charger can only charge the combination BA 2015 accupack/bodypack
transmitter. Standard batteries (primary cells) or individual rechargeable battery
cells cannot be charged.
Connecting the microphone cable/instrument cable
The audio input is designed for the connection of both condenser microphones and instru-
ments (e.g. guitars). DC powering of the condenser microphones is via the audio input.
Use one of the recommended Sennheiser microphones or the optional CI 1 instrument
cable.
Connect the 3.5 mm jack plug
the 3.5 mm jack socket
Lock the 3.5 mm jack plug by screwing down the coupling ring
Via the operating menu, adjust the sensitivity of the microphone/line input.
Attaching and positioning the corresponding microphones
Use the microphone clip
The ME 2 clip-on microphone (shown on the right in the diagram) has an omni-directional
pick-up pattern. It is therefore not necessary to position it precisely.
Attach the ME 2 microphone as close as possible to the sound source.
The ME 4 clip-on microphone (shown on the left in the diagram) has a cardioid pick-up
pattern.
Position the ME 4 microphone so that its sound inlet is directed towards the sound source
(e.g. mouth).
Adjust the ME 3 headmic so that a comfortable and secure fit is ensured.
The ME 3 headmic has a cardioid pick-up pattern.
Position the microphone so that its sound inlet is directed towards the sound source
(e.g. mouth).
Attaching the bodypack transmitter to clothing
You can use the belt clip
band).
The belt clip is detachable so that you can also attach the transmitter with the antenna
pointing downwards. To do so, withdraw the belt clip
the other way round. The belt clip
accidentally.
from the Sennheiser microphone or instrument cable to
³.
MIC/LINE
to attach the microphone to clothing (e.g. tie, lapel).
to attach the bodypack transmitter to clothing (e.g. belt, waist-
is secured so that it cannot slide out of its fixing points
of the cable.
from its fixing points and attach it