Cleaning And Maintenance; Cleaning The Sound Inlet Basket Of The Microphone Module - Sennheiser Evolution Wireless Digital Series Instruction Manual

Cleaning and maintenance

Note the following information when cleaning and maintaining
products of the Evolution Wireless Digital series.
ATTENTION
Liquids can damage the products' electronics.
Liquids entering the product housing can cause a short-circuit
and damage the electronics.
Keep all liquids away from the products.
▷
Do not use any solvents or cleansing agents.
▷
Disconnect the products from the power supply system
▷
and remove rechargeable batteries and batteries before
you begin cleaning.
Clean all products only with a soft, dry cloth.
▷
Note the special cleaning instructions below for the follow-
▷
ing products.
Cleaning the sound inlet basket of the microphone
module
Unscrew the top sound inlet basket from the microphone
▷
module by turning it counterclockwise.
Remove the foam insert.
▷
►
You can clean the sound inlet basket in two ways:
• Use a slightly damp cloth to clean the top sound inlet basket
from the inside and outside.
• Use a brush and rinse with clean water.
If necessary, clean the foam insert with a mild detergent or
▷
replace the foam insert.
Dry the top sound inlet basket and foam insert.
▷
Cleaning and maintenance
215