Dell OptiPlex Small Form Factor Plus 7020 Owner's Manual page 123

Table 33. System setup options—Integrated Devices menu (continued)
Integrated Devices
Enable Front USB Ports
Enable Rear USB Ports
Enable USB Boot Support
Front USB Configuration
Rear USB Configuration
Dust Filter Maintenance
Dust Filter Maintenance
Table 34. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation
Storage Interface
Port Enablement
SMART Reporting
Enable SMART Reporting
Drive Information
Enable MediaCard
Secure Digital (SD) Card
Secure Digital (SD) Card Read-Only Mode
Table 35. System setup options—Display menu
Display
Multi-Display
Enables the front USB ports.
By default, the Enable Front USB Ports option is enabled.
Enables the rear USB ports.
By default, the Enable Rear USB Ports option is enabled.
Enables booting from USB mass storage devices that are connected to external
USB ports.
By default, the Enable USB Boot Support option is enabled.
Allows the user to enable of disable individual front USB ports.
By default, all the front USB ports are enabled.
Allows the user to enable of disable individual rear USB ports.
By default, all the rear USB ports are enabled.
Enables of disables BIOS messages for maintaining the optional dust filter
installed in the computer.
By default, the Dust Filter Maintenance option is disabled.
Sets the operating mode of the integrated SATA hard drive controller.
By default, the RAID On option is selected.
Displays the information of various onboard drives.
Enables or disables the M.2 PCIe SSD option.
By default, the SATA option is enabled.
By default, the M.2 PCIe SSD option is enabled.
Displays the information of onboard drives.
Enables or disables the BIOS to report integrated hard-drive errors during system
startup.
By default, the Enable SMART Reporting option is disabled.
Displays the information of onboard drives.
Enables or disables the SD card.
By default, the Secure Digital (SD) Card option is enabled.
Enables or disables the SD card read-only mode.
By default, the Secure Digital (SD) Card Read-Only Mode option is disabled.
BIOS Setup 123