Dell OptiPlex Small Form Factor Plus 7020 Owner's Manual page 130

Table 41. System setup options—System Management menu (continued)
System Management
Asset Tag
Wake on LAN
Auto On Time
Intel AMT Capability
Enable Intel AMT Capability
Enable SERR Messages
First Power On Date
Set Ownership Date
DIagnostics
OS Agent Requests
Power-on Self-Test Attomatic
Recovery
Power-on Self-Test Automatic Recovery
Table 42. System setup options—Keyboard menu
Keyboard
Keyboard Errors
Enable Keyboard Error Detection
Numlock LED
Enable Numlock LED
Device Configuration HotKey Access
130 BIOS Setup
Creates a computer Asset Tag that can be used by an IT administrator to uniquely
identify a particular computer.
NOTE: Once set in BIOS, the Asset Tag cannot be changed.
Enables or disables the computer to turn on by a special LAN signal.
By default, the Wake on LAN option is disabled.
Enable to set the computer to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays, or Selected Days.
By default, the Auto On Time option is disabled.
Enables or disables the MEBx in pre-boot menu.
By default, the Restrict Boot Access option is selected.
Enables or disables SERR messages.
By default, the Enable SERR Messages option is enabled.
Allows the user to set the Ownership date..
By default, the Set Ownership Date option is disabled.
Enables the user to configure the Ownership date.
By default, the OS Agent Requests option is enabled.
Enables or disables the computer to respond before completing the BIOS Power-
on Self-Test (POST).
By default, the Power-on Self-Test Automatic Recovery option is enabled.
Enables or disables the keyboard error detection.
By default, the Enable Keyboard Error Detection option is enabled.
Enables or disables Numlock LED.
By default, the Enable Numlock LED option is enabled.
Allows you to control whether you can access device configuration screens
through hotkeys during computer startup.
By default, the Device Configuration HotKey Access option is enabled.
NOTE: This setting controls only the Intel RAID (CTRL+I), MEBX (CTRL+P),
and LSI RAID (CTRL+C) Option ROMs. Other preboot Option ROMs, which
support entry using a key sequence, are not affected by this setting.