Next steps
1. Install the
disk-drive
cage.
2. Install the
3.5-inch hard
3. Install the
front
bezel.
4. Install the
side
cover.
5. Follow the procedure in
Wireless antenna module
Internal antenna module
Removing the internal antenna module
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
4. Remove the
3.5-inch hard
5. Remove the
disk-drive
6. Remove the
wireless
card.
About this task
The following images indicate that the location of the internal antenna module and provide a visual representation of the removal
procedure.
82
Removing and installing Field Replaceable Units (FRUs)
drive, if applicable.
After working inside your
Before working inside your
drive, if applicable.
cage.
computer.
computer.
Need help?
Do you have a question about the OptiPlex Small Form Factor Plus 7020 and is the answer not in the manual?