Dell OptiPlex Small Form Factor Plus 7020 Owner's Manual page 127

Table 38. System setup options—Security menu (continued)
Security
Start Data Wipe
Absolute
Absolute
UEFI Boot Path Security
UEFI Boot Path Security
Table 39. System setup options—Passwords menu
Passwords
Administrator Password
System Password
Data Wipe is a secure wipe operation that deletes information from a storage
device.
CAUTION: The secure Data Wipe operation deletes information in a
way that it cannot be reconstructed.
Commands such as delete and format in the operating system may remove files
from showing up in the file system. However, they can be reconstructed through
forensic means as they are still represented on the physical media. Data Wipe
prevents this reconstruction and is not recoverable.
When enabled, the data wipe option will prompt to wipe any storage devices that
are connected to the computer on the next boot.
By default, the Start Data Wipe option is disabled.
Absolute Software provides various cyber security solutions, some requiring
software preloaded on Dell computers and integrated into the BIOS. To use these
features, you must enable the Absolute BIOS setting and contact Absolute for
configuration and activation.
By default, the Absolute option is enabled.
For additional security, Dell Technologies recommends keeping the Absolute
option enabled.
NOTE: When the Absolute features are activated, the Absolute integration
cannot be disabled from the BIOS setup screen.
Enables or disables the computer to prompt the user to enter the Administrator
password (if set) when booting to a UEFI boot path device from the F12 boot
menu.
By default, the Always Except Internal HDD option is enabled.
The Administrator Password prevents unauthorized access to the BIOS Setup
options. Once the administrator password is set, the BIOS setup options can only
be modified after providing the correct password.
The following rules and dependencies apply to the Administrator Password -
● The administrator password cannot be set if computer and/or internal hard
drive passwords are previously set.
● The administrator password can be used in place of the computer and/or
internal hard drive passwords.
● When set, the administrator password must be provided during a firmware
update.
● Clearing the administrator password also clears the computer password (if
set).
Dell Technologies recommends using an administrator password to prevent
unauthorized changes to BIOS setup options.
The System Password prevents the computer from booting to an operating
system without entering the correct password.
The following rules and dependencies apply when the System Password is used -
● The computer shuts down when idle for approximately 10 minutes at the
computer password prompt.
BIOS Setup 127