Disk-Drive Cage; Removing The Disk-Drive Cage - Dell OptiPlex Small Form Factor Plus 7020 Owner's Manual

3. Align the tabs on the hard-drive carrier with the slots on the chassis and snap the hard-drive assembly onto the disk-drive
cage.
4. Connect the data and power cables to the connectors on the hard drive.
Next steps
1. Install the side cover.
2. Follow the procedure in

Disk-drive cage

Removing the disk-drive cage

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 3.5-inch hard
About this task
The following images indicate the location of the disk-drive cage and provide a visual representation of the removal procedure.
48 Removing and installing Customer Replaceable Units (CRUs)
After working inside your
Before working inside your
drive, if applicable.
computer.
computer.