Table of Contents
Advertisement
Chapter 2: Web Configuration
Connection
This page reports current connection status containing startup procedures, downstream and
upstream status, CM online information, and so on. The information can be useful to your cable
company's support technician if you're having problems.
Fig. 9
Password
This page is used to change the password that enables you to access the gateway web pages
" "(EMPTY)
admin"
next time. The default User ID is
, and the password is "
. The password can be a
maximum of 8 characters and is case sensitive. In addition, this page can be used to restore the
gateway to its original factory settings. Use this with caution, as all the settings you have made
will be lost. To perform this reset, set Restore Factory Defaults to Yes and click Apply. This has
the same effect as a factory reset using the rear panel reset switch, where you hold in the switch
for 15 seconds, then release.
Fig. 10
Illustrations contained in this document are for representation only.
27
Hide quick links:
Advertisement
Table of Contents
