Advanced Setup - Ferguson FDT 2000 DIGITAL TERRESTRIAL RECEIVER Manual

8510 FDT2000 Rev2 inc scart

ADVANCED SETUP

G
G
G
G
17/2/03 6:27 pm
TV Setup
You can choose how pictures are displayed on your TV.
1. Press , select the SETUP menu and press
2. Now select TV SETUP and press
3. Now choose the type of TV screen you have. Use
and choose 16:9 for a widescreen TV or 4:3 for a
conventional one.
4. The Widescreen option chooses how widescreen images
Back G Quit
are shown on a conventional (4:3) TV. Use
and choose from Letterbox, Centre Cutout (centre
action only shown) or Full Frame (stretched).
5. Use / to turn the RF Modulator On or Off.
6. The Modulator Channel is set by the factory to CH22. If
you wish to change the channel you tune your TV to (in
order to avoid interference), use
7. Now choose the Video Output mode. Use
choose from RGB (best quality pictures for TVs that
support it) or PAL (suitable for all other TV sets).
8. To exit menu press
Languages
You can choose your desired languages for Sound, Subtitles
and Interactive (data) Services, where more than just English
is being transmitted.
1. Press , select the SETUP menu and press
2. Select LANGUAGES and press
G
Back Quit
3. Select Subtitles, Data Services or Audio using L / M.
/
4. Use /ÿ to choose the desired language or Off to
suppress Subtitles.
5. To exit menu press
PIN number
You can choose a PIN (Personal Identification Number) for
use with parental controls. The receiver was originally
programmed with 1234. It is recommended that you change
this for your own number.
1. Press , select SETUP menu and press
G
Back Quit
2. Select PARENTAL CONTROL and press
3. Now enter the current PIN ****.
4. Select CHANGE PIN and press
5. Use 0..9 to enter a new PIN.
6. Use 0..9 to confirm new PIN. When confirmed, this
number is now stored. KEEP THIS NUMBER SAFE!
7. To exit menu press
G
Back Quit
Page 7
.
to adjust it.
/
/ÿ
.
.
.
.
.
.
.
.
/ÿ
/
/ ÿ
/ to
.
7