Other Information - Ferguson FDT 2000 DIGITAL TERRESTRIAL RECEIVER Manual

8510 FDT2000 Rev2 inc scart

OTHER INFORMATION

G
Back
Electricity Consumption - Saving Energy!
The Receiver will always switch to standby when you press the
still use energy running other functions of the receiver. To minimise this
energy drain, if you press and hold the
functions. In this mode the Receiver only uses a tiny amount of energy, but it
will take a little longer to switch on. In this mode you must use the
on the front of the unit to switch it back on. This returns the unit to normal
standby and you can now use the remote control as normal. This low power
standby mode will also interrupt the aerial signal, making analogue TV viewing
or recording impossible.
Optional extras
In addition to a VCR being used along side the receiver, a remote IR extender
(mouse) may be installed. This gives you the advantage of placing the receiver
out of view, leaving only the mouse on display.
When used in conjunction with a remote control, the mouse allows the full use
of receiver functions.
Alternatively press +/- on the mouse to scroll through the channels.
Cleaning your receiver
Dust will collect on the unit and can be removed with dry clean cloth. Do not
spray any substance on the unit.
17/2/03 6:27 pm
Technical information details
The technical information screen displays the hardware
and software information of the receiver. This
information may be required by the service agent or
service call operator.
1. Press , select SETUP and press
G 2. Select TECHNICAL INFORMATION and press
Quit
Page 13
.
key, but will
key, the Receiver will switch off all
.
button
13